pre-lit tree INSTRUCTIONS GUIDE
attention 2 Class B Disclaimer: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
physical setup Tree stand for ITEM #: TG76P4969P10 ITEM #: TG76P4969P11 a. Tree stand for ITEM #: TG90P4969P07 b.
4 c. d. e. f.
1. Shape the tree from the bottom to the top. Start with the branches farthest from the pole – fan out in a star shape, and continue until the entire tree is shaped. Top view Side view When finished shaping the branches, slightly upsweep all branch tips for a uniform look.
6 2. 3. BUTTON LED INDICATOR Button: Switch between preset effects/reset • CONTINUOUS GREEN: AP mode, connected • FLASHING GREEN: AP mode, no device connected • CONTINUOUS BLUE: Wi-Fi mode, connected • FLASHING BLUE: Wi-Fi mode, connection in progress 1. Assemble the tree as shown in pictures 2. Plug the power adapter into an AC outlet 3.
app download 1. 2. 3. Twinkly Cancel Twinkly GET Lifestyle 30 1. Go to App Store/Google Play (by scanning the QR code) 2. Download and install the “Twinkly” app 3.
set up twinkly 1. 8 2. Bluetooth Bluetooth Twinkly Choose your Twinkly! Generation I (2 Feedback LED) Bluetooth Bluetooth Generation II 1. Make sure Bluetooth is turned on 2.
3. 4. 5. 5 sec SKIP SETUP Configuring Twinkly with Configure your Twinkly Home Internet Please select the LED count of your Twinkly Insert your Wi-Fi password Connecting... 210 270 330 390 435 480 540 600 660 xxxxxxxxxx 750 Home Internet If you’re not sure, please see the number under the Twinkly controller Configure Insert your Wi-Fi password xxxxxxxxxx 3. Press and hold the controller button until the LED is GREENISH BLUE (approx 5 sec) 4.
mapping 10 1. 2. 3. DEFAULT LAYOUT START MAPPING MAP LIGHTS START MAPPING Map the layout of your decoration to unlock the full potential of your Twinkly tree like advanced effects, drawing and many upcoming features. 1. Open Layout and tap the “Map Lights” button 2. Frame the tree from a distance of 1.5-2.5 meters 3. Tap the “Start Mapping” button (all LEDs will illuminate with different RGB colors during the process).
mapping tips For best results, avoid reflective surfaces behind the tree, keep the mobile cam steady during the process and ensure a moderate ambient light (not too dark)
choose preset effects 1. 12 2. SNOW 3. 4. RAINBOW SNOW UPDOWN GALLERY FIREWORK EDIT FAVOURITES APPLY EDIT APPLY 1. Launch the Twinkly app and open the Effects Gallery 2. Select the desired effect to see the real-time preview on your Twinkly set-up 3. Swipe left or right to browse effects 4. Tap “Apply” to store the effect and play continuously Note: App user interface may change due to technical updates and improvements.
advanced features Connect to local WiFi. Browse, play and edit effects. Create new effects. Group multiple devices together.
troubleshooting 14 DO NOT RETURN TO STORE.
reset twinkly 1. 2. 1. Unplug the Twinkly power adapter from the AC outlet. Press and hold the controller button 2. While holding the button, plug in the Twinkly power adapter 3.
16 3.
devices storage 1. 2. 3. ITEM #: TG90P4969P07 ITEM #: TG76P4969P10 ITEM #: TG76P4969P11 1. Unplug the power adapter from the AC outlet 2. Lift tree poles up gently to disassemble, from top to bottom. Fold all branches towards the pole 3. Close all pole caps 4.
DISTRIBUTED BY: HOME DEPOT 2455 PACES FERRY ROAD ATLANTA, GA 30339 FOR ASSISTANCE, CALL: 1-877-527-0313 WWW.HOMEDEPOT.COM Form 8am to 5pm EST, Monday through Friday.
