Instructions / Assembly

CAUTION:

1.Before starting installation of this fixture or removal of a previous fixture,

disconnect the power by turning off the circuit breaker or by removing the fuse at

the fuse box.

2.All electrical connections must be in accordance with local and National

Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical

wiring connections obtain services of a qualified electrician.

3.There are no serviceable parts inside the motion sensor. DO NOT try to repair

or disassemble the unit. Doing so could damage the unit and cause possible

electrical shock. Consult a qualified electrician if needed.

SELECTING A LOCATION:

1.When selecting a location, be aware of the motion sensor’s maximum range of

30 ft and 220º detection angle (Fig. 1). In addition, be aware of its 15º detection

down-angle (from horizontal) (Fig. 2). Mounting the fixture too high or in front

of a sloped surface, such as an uphill walkway or driveway, may affect the

motion sensor’s effectiveness.

2.Select locations away from heat sources, such as heating vents, air conditioners,

and heated swimming pools.

220

Fig. 1

Fig. 2

Page 5