Use and Care Manual

A
BB
CC
5
HOMEDEPOT.COM/HomeDecorators
Please contact 1-800-986-3460 for further assistance.
Assembly (continued)
4
Securing the linen cabinet
□ Thread the tie (FF) through the slot in the bracket (CC)
attached to the wall, then through the bracket (CC)
attached to the cabinet (A).
Thread the end of the tie (FF) through the slot in it’s
opposite end, creating a loop.
Push the cabinet (A) ush against the wall, and tighten
the tie’s (FF) loop until it becomes taught.
□
□
3
Attaching the brackets
□
Center a bracket (CC) against the back of the cabinet (A)
along the top edge.
Insert the short screw (BB) through the space in the
bracket (CC), and screw into the cabinet (A) using a
screwdriver.
Measure the height of the bracket (CC) from the oor
using a tape measure.
Measure this same vertical distance on the wall where
the cabinet (A) will stand against, and mark with a pencil.
Use a hammer to gently punch the anchor (DD) halfway
into the wall at the marked location. Finish screwing
in the anchor (DD) with the screwdriver.
Place a bracket (CC) ush against the anchor, and insert
the long screw (EE) through the space and into the anchor
(DD). Screw it in using the screwdriver.
□
□
□
□
□
FF
CC
CC
X
AA
A
EE
DD
CC
X