Item #xxxx xxx xxx Model #59601 ETL Model #60-APOL USE AND CARE GUIDE APOLLO 60-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS To view an instructional video on how to install this product: 1. Go to www.homedepot.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS F A G B H C D I J E Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly 1 C Canopy with canopy ring attached 1 D Decorative motor collar cover 1 E Fan-motor assembly 1 Part Description Quantity F Blade 2 G Light kit pan 1 I Glass shade 1 J Remote control (batteries included) 1 H 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Pull off the canopy bottom cover (GG) from the canopy (C). □□ Loosen the two canopy screws (FF) located in the Routing the wires □□ Routing the wires exiting the top of the fan motor assembly (E) through the center of the canopy ring (FF). Make sure the slots on the canopy ring (FF) are on top. □□ Insert the balldownrod (B) through the canopy (C) and slide the decorative motor collar cover (D) onto the end of the ball/ downrod (B).
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. mounting bracket (A).
Assembly - Hanging the Fan (continued) 4 Making the electrical connection WARNING: Each wire nut supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Outlet box in the ceiling RR Black IMPORTANT: Use the plastic wire connectors (BB) supplied with your fan.
Assembly - Hanging the Fan (continued) 5 Wrapping the extra wire NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan. □□ Gently wrap the excess wire around the mounting bracket. □□ Secure with electrical tape. 6 Mounting the fan-motor assembly (standard mount) □□ Align the locking slots of the canopy (C) with the two screws □□ □□ □□ JJ (JJ) and alignment post (KK) in the mounting bracket (A).
Assembly - Attaching the Fan Blades 1 Attaching the fan blades □□ Attach the blade assembly to the motor assembly (E) by □□ E aligning the screw holes on the blade (F) with the screw holes on the bottom of the fan motor assembly (E). Insert the screws (DD) into the holes on the blade (F) and through the holes on the bottom of the fan motor assembly (E), and insert the blade arm screws (EE) through the holes on the top on the fan motor assembly (E) and tighten each screw to secure the blade assembly.
Assembly - Attaching the Accessories (continued) 3 Attaching the light kit fitter assembly □□ Remove one screw (LL) from the light kit pan, and loosen, but □□ □□ □□ □□ do not remove the other two screws. Connect the wires from the light kit fitter assembly (H) to the wires from the fan motor assembly (E) by connecting the molded adaptor plugs together. Carefully tuck all wires and splices into the switch cup.
Preparing the Remote Control Pairing the Remote Control NOTE: The remote control has already been paired to the ceiling fan for your convenience. If you have two of the same model fans in your home, please follow the steps below to control each fan independently. will begin to spin. LEARN 0 1 □□ If pairing is successful, the fan’s light kit will flash and the blades APRENDER ENCENDIDO 0 1 compartment within 30 seconds. REGULADOR □□ Return power to the fan at the wall switch or breaker box.
Operating Your Fan and Remote Control 1. Fan button. - Press and release the or off. button to turn the fan on □□ Fan on. The fan memory function will resume the speed set on the fan prior to the power being turned off. The LED bar will display the current settings for 5 seconds after the button is released. □□ Fan off. The fan memory function will store the current setting for the next time the fan is in use.
Operating Your Fan and Remote Control 4. Timer □□ Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer mode, the LED to the left of the time above the clock will illuminate. Off 2H 4H 8H Disables timer 5. Fan reverse button (Must be pushed when the fan is in operation) □□ Warm weather: LED bar will illuminate and the lights will flow from high to low.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.