Item # 1002 270 276 Model # 17161 USE AND CARE GUIDE 5-LIGHT LED PENDANT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 7 Troubleshooting ............................................................ 7 FCC statement ..............................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460. NOTE: The LED has been permanently installed in this lamp.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity Part G H I 1 16+1 8+1 J Big crystal drop 4+1 Canopy 1 F B C D Button Wire clip Glass shade Screw (Preassembled to fixture body (G)) 3 5 1 3 4 Quantity “L” bracket (Preassembled to fixture body (G)) Fixture body Small crystal drop Medium crystal drop A E Description 3
Installation 1 Preparing the mounting bracket Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (FF). Screw the threaded tube (BB) into the mounting bracket (AA), and secure it using the lock washer (DD) and hex nut (EE). NOTE: The threaded tube (BB) should extend long enough to protrude through the canopy (A) when it is mounted. (Adjust as needed.) 2 Assembling the glass shade to the fixture body 3 Loosen the three screws (E) and slip the “L” brackets (F).
Installation (continued) 4 Connecting the wires Strip 3/4 in. of insulation from wire ends. Connect the black live wire from the canopy (A) to the black wire from the outlet box and the white neutral wire from the canopy (A) to the white wire from the outlet box. Twist the stripped ends together with pliers.
Care and Cleaning Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. To clean the fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box. Use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The LED will not light. The LED is burned out. Discontinue the use of the lamp. The power is off.
Service Parts MODEL TYPE: 17161 Part Description AA BB Mounting bracket Threaded tube Green ground screw (Preassembled to mounting bracket (AA)) CC Part Description B C Push button Wire clip D Glass shade DD Lock washer E EE Hex nut F FF GG HH A Outlet box screw Wire connector Finial Canopy G H I J Screw (Preassembled to fixture body (G)) “L” bracket (Preassembled to fixture body (G)) Fixture body Small crystal drop Medium crystal drop Big crystal drop 8
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo #1002 270 276 Modelo #17161 GUÍA DE USO Y MANTENIMIENTO LÁMPARA COLGANTE LED DE 5 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.
Índice Aparillage Incluido ...................................................................3 Contenido del Paquete .............................................................4 Instalación ..................................................................... 5 Cuidado y Limpieza ...................................................... 7 Solución de Problemas ................................................ 7 Declaración de la FCC.................................................. 7 Partes de Servicio .....
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. IMPORTANTE : Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspenda el ensamblaje. Por favor llama a nuestro Equipo de Servicio al Cliente al 1-800-986-3460.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE Pieza Descripción Cantidad Pieza G H I 1 16+1 8+1 J Lágrima de cristal grande 4+1 Dosel 1 F B C D Botón de presión Presilla del cable Campana de vidrio Tornillo (Pre-ensamblado al cuerpo de la lámpara (G)) 3 5 1 3 4 Cantidad Soporte en "L" (Pre-instalado al cuerpo de la lámpara (G)) Cuerpo de la lámpara Lágrima de cristal pequeña Lágrima de cristal mediana A E Descripción 3
Instalación 1 Preparando el soporte de montaje Asegure el soporte de montaje (AA) a la caja eléctrica usando los dos tornillos de la caja eléctrica (FF). Enrosque el tubo roscado (BB) en el soporte de montaje (AA), y asegúrelo usando la arandela de seguridad (DD) y la tuerca hexagonal (EE). NOTA: El tubo roscado (BB) debe extenderse lo suficiente para sobresalir a traves del dosel (A) cuando este esté montado. (Ajuste como sea necesario).
Instalación (continuación) 4 Realizando la conexión eléctrica Pelar el aislamiento del extremo de los cables 3/4 pulgadas. Conecte el cable negro del dosel (A) con el cable negro de la caja eléctrica, y el cable blanco del dosel (A) con el cable blanco de la caja eléctrica.
Mantenimiento y Limpieza No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automático o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el exterior de la lámpara.
Piezas de remplazo MODELO: 17161 Pieza AA BB CC Descripción Soporte de montaje Tubo roscado Tornillo verde a tierra (Preinstalado al soporte de montaje (AA)) Pieza Descripción B C Botón de presión Presilla del cable D Campana de vidrio DD Arandela de seguridad E EE Tuerca hexagonal F FF GG HH A Tornillo de la caja eléctrica (corto) Conector de cable Remate Dosel G H I J Tornillo (Pre-ensamblado al cuerpo de la lámpara (G)) Soporte en "L" (Pre-instalado al cuerpo de la lámpara (G)) Cuerpo d
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.