Installation Guide

6
Installation (continued)
3
Attaching the fixture body to the
outlet box
□ Place the fixture body
(
A
) over the outlet box, let the support
screws (BB) come through the hole of the fixture body (A),
then tighten the cap nuts (EE) to the protruding support screws
(BB) on mounting bracket (AA) until the fixture body (A) is held
firmly against the ceiling.
4
Installing the light bulbs
5
Attaching glass plate to the fixture
body
□ Install the light bulbs (JJ) (included) into the sockets. Use five
40 W G9 base xenon bulbs.
NOTE: Use only Max 40W type G9 xenon bulbs. DO
NOT use type G9 halogen bulbs without a shield. Do not
touch the G9 xenon bulbs with bare hands at any time.
A pair of white gloves has been included for installation
as oil from the skin may damage the bulb.
Please remove the protective film before installing
bulbs.
□ Place the glass plate (B) and plastic washer (HH) over the tube
onto the bottom of the fixture body (A), then secure with the
finial (II).