RIGID DECORATORS Item # 1004250630 ee USE AND CARE GUIDE CANE NIGHT STAND tl vertebral beech lyrebird Biblical pot) Lily Questions, problems, missing parts? Before resuming to the store, call Home Decorators Collection Customer Service 8am. 7 pm, EST, Monday Friday, p.m., EST, Saturday 1-800-086-3460 THANK YOU Wo appropriates the trust and confidence you have placed in Home Corridors Collection rough the purchase of tis Cane Night Stand.
Table of Contents .. Safety Information . Warranty... What is Covered What is not Covered Pr-Assembly. Planning Assembly. wwhNRNON Tools required 3 Hardware Included 3 Package Contents . 4 Assembly... ..5 Maintenance o Care and Cleaning 13 Troubleshooting O Keep small parts away from children during assembly. O Read and follow instructions carefully. O Read these instructions carefully and keep in a safe place.
PLANNING ASSEMBLY 1. Use a soft cloth between these parts and the floor. 2. Identify the parts which make up your pica of furniture 3. Gather the hardware parts and count them 4. Lava the necessary tools ready. 5. Keep Allen Key & Wrench as the Bolts & Nuts may need to be tightened in the future TOOLS REQUIRED & Phillips screwdriver HARDWARE INCLUDED doa Ld. 9.
1 Attaching Cam Lock Bolts. 0 Attach Cam Lock Bolts (DD) to Top Anal (A), Left & Right Assemblies {B) & {C}.
2 Attaching the Rails to Left Assembly. 0 Attach Front & Back Top Rail {D) & (E}, Front Rails (F) & Back Bottom Rail {G} to Left Assembly (B) using Gam Locks {EE). NS.
6 Attaching Wedges to unit. 0 Attach Wedges (HH) to unit using Fat Head Screws {Short) (CC).
7 Assembly the Drawers. 0 Attach Drawer Left & Right Drawer Back (L) using Fiat Head Screws (Long) (AA). O Insert Drawer Base (M} into groove. 0 Attach Drawer Front (1) to Drawer Left & Right {J) & (K) using Fiat Heed Screws (Long) (AA) 0 Attach Handles (8G) to Drawer Front {} using Handle Bolts {FF) 0 Do the same step to the next drawer. Fart Description AA |Fist Head Screw (Long) FF Handle Bolt 68 Handle 1 NS.
8 Adjusting the Drawers. O Loosen slightly screws per-installed on back of Drawer Fronts (8.1) O Insert drawer into unit, then adjust drawer front panel lft or right & up or down until drawer gaps look proportional. (8.2) 0 Pull drawer open slowly, then re tighten screws Serenade in Step 8.1. (8.3) 0 Make sure drawer front panels de not move & lock drawer front panel into position using Fiat Head Screws (Medium) (BB). (8.4) 8.
NEVER 1. Allow liquids to remain on furniture. Absorption causes parts to warp and spit and finishes te laminate. 2. Use glass cleaner on finished furniture. Ammonia chemically attacks the finish DO NOT 1. Place in direct sunlight to prevent fading, 2. Write directly on surface to prevent marking. 3. Place hot objects an surface to prevent finish damage. 4. Use rubber based place mats to prevent discoloring. 5. Use commercial waxes and polishes to prevent yellowing.
HOME DECORATORS COLLECTION Questions, problems, missing parts? Before resuming to the store, cal Home Decorators Collection Customer Service gam. 7 p.m, EST, Monday Friday, 9am. 6 p.m, EST, Saturday 1-800-986-3460 HOME DEPOT.