Instructions / Assembly

Christ mas Tree
S ku # S C10-315
Operat ion
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/ or broken, loose, or missing bulbs. Replace bulbs
promptly wit h the replacement bulbs provided in order to
maintain t he performance and life expectancy of your t ree.
Step 1. Connect the light strings of the tree t ogether and plug
the power cord int o a wall out let .
St ep 2. If
the t ree comes wit h a foot pedal, st ep on t he
On/ Off button.
Maint enance
Spare part s
This t ree package includes bulbs, and fuses for any
replacement or repair that you need t o perform on your t ree.
If ext ra part s are needed, cont act t he Cust omer Service Team
at 1-877-527-0313 bet ween t he hours of 8 am and 5 pm EST,
Monday t hrough Friday.
Repairing Loose Hinges
St ep 1. Place t he branch int o the slot of t he bracket
St ep 2. Insert a new hinge pin t hrough the holes of the
bracket and secure wit h a washer.
Care and Cleaning
St ep 1. Remove all ornaments and decorations.
St ep 2. Unplug t he cord from t he wall and t hen unplug each
sect ion of t he tree.
St ep 3. Gent ly lif t the t ree top st raight up t o remove from t he
center section and fold all branches towards t he pole.
St ep 4. Carefully place all t ree sections int o a shippin
g box
and t ape it shut.
St ep 5. St ore your t ree in a cool, dry place away from sunlight.
Troubleshoot ing
Problem Solut ion
The t ree does not
light
Ensure t hat all tree sections are
plugged into each other and t hat
the t ree is plugged int o t he wall. If
your tree came wit h a foot pedal,
st ep on t he On/ Off but t on.
Check for blown fuses at t he light
st ring and power cord plugs.
Replace as needed wit h t he
replacement fuses provided.
Check for loose, broken, or
missing bulbs and replace as
needed wit h t he replacement
bulbs provided
SAVE THESE INSTRUCTIONS
IMPORTANT: Do not remove bulbs wit h t he whit e ring base.
These bulbs are safet y fused bulbs and removing t hem will
permanently damage t he light st ring and void the limit ed
warranty of t his product.
Pre-Assembly
Package Cont ents
Part Descript ion Quant it y
A Tree t op, t ag A 1
B
Tree bot tom wit h pot ,tag B
1
Assembly
Assembling t he tree
St ep 1. Insert t he t ree t op (A) int o t he t ree bottom (B).
St ep 2. Shape the branches to your preference by working from
the bott om to the top. When adj ust ing branches,ensure that all
wires are free of branch hinges.
Step 3. When finished shaping the branches,slight ly upsweep
all branch tips for a uniform look.
Step 4. Connect the plug (E) of st ring with t he end cord (D)of
st ring.
Step
5. Insert t he plug(F) of st ring into t he wall outlet (see
illust ration)