INcad001_US_CA_ES 831-558_831-557_831-559_831-560 EN: This product is subject to the actual product, the picture is only for reference FR: Ce produit est soumis au produit réel, l'image est pour référence seulement ES: Este producto está sujeto al producto real, la imagen es solo para referencia IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY IMPORTANT - CONSERVEZ CES INFORMATIONS POUR VOTRE CONSULTATION ULTÉRIEURE: LISEZ ATTENTIVEMENT IMPORTANTE - CONSERVE ESTA INFORMACIÓN PARA SU CONSULTA POSTER
EN Product parts display Hanging door hole Hidden clothes hanger Side panel Support rod Magnetic attraction Partition Connection buckle Magnetic iron sheet Small cylinder Handle hole Connection buckle slot -2-
EN Installation instructions Cabinet body:Pull it Stretch the cabinet Lay down the cabinet frame, and open each layer in turn Unfastened state Fastened state Fasten the connecting rod bracket Straighten and fasten each support rod Side panel:Take a shot Open the side panel Snap the side panels to the left and right frames Slot inside side panel Snap into slot Confirm that the side plate and the slot position are all fastened Door panel:Buckle it up The door panel is parallel to the cabinet body Alig
EN Product model Size Size Size Capacity Capacity Capacity Size Size Size Capacity Capacity Capacity Size Capacity -4-
EN Notes 1.Daily cleaning, do not use brush, calcium carbonate powder and other items, with a sponge dipped in a neutral detergent to wipe, and then wipe with a dry cloth; 2.The product has just been taken indoors from the outdoor area below 0 degrees. Place it for a period of time to ensure that the temperature of the product is higher than 0 degrees before installation. Note before installation: Please check the accessories before installation. 1.
FR Présentation des pièces Trou de suspension de porte Cintre couvert Panneau latéral Tige de support Attraction magnétique Cloison de séparation Boucle de connexion Plaque en acier magnétique Petit barillet Trou de poignée Fente de la boucle de connexion -6-
FR Instructions de montage Structure de l'armoire : Tirer Déployer l'armoire Posez le cadre de l'armoire et déployez chaque couche à tour de rôle Etat non verrouillé Etat verrouillé Fixer le support de la tige de connexion Redresser et fixer chaque tige de support Panneau latéral: A enclencher dans la structure Ouvrir le panneau latéral Enclencher les panneaux latéraux dans les cadres gauche et droit Fente sur le panneau latéral Enclencher dans la fente Assurez-vous que le panneau latéral et la posit
FR Modèle du produit Dimensions: 137*104*50 Capacité: 710L Dimensions: 137*69*50 Capacité: 470L Dimensions: 137*34*50 Capacité: 230L Dimensions: 104*104*50 Capacité: 540L Dimensions: 104*69*50 Capacité: 360L Dimensions: 104*34*50 Capacité: 170L Dimensions: 71*34*50 Capacité: 120L -8-
FR Notes 1. Nettoyage quotidien, ne pas utiliser de brosse, de poudre de carbonate de calcium et d'autres éléments; nettoyer avec une éponge trempée dans un détergent neutre puis essuyer avec un chiffon sec; 2. Le produit vient d'être ramené à l'intérieur depuis une zone extérieure inférieure à 0 degré. Laissez-le pendant un certain temps pour vous assurer que la température du produit est supérieure à 0 degré avant de l'installer.
ES VISTA DE LAS PIEZAS DEL PRODUCTO Orificio para colgar la puerta Barra de ropa oculta Panel lateral Varilla de soporte Cierre magnético Tabique Hebilla de conexión Imán Cilindro pequeño Tirador hueco Hebilla de conexión ranura para tarjeta -10-
ES INSTRUCCIONES DE MONTAJE Cuerpo del mueble: Tire del cuerpo del producto Estire el mueble. Coloque el marco del mueble, luego abra cada capa por orden. Sin fijar Fijado Fije las varillas de conexión encajando las ranuras Enderece y fije cada varilla de soporte. Paneles laterales: Golpéelos para fijarlos en su posición Abra los paneles laterales, luego encaje los paneles laterales en los marcos izquierdo y derecho. Ranura interior del panel lateral Encaje los paneles en las ranuras.
ES Modelo del Producto Medidas: 137*104*50 Capacidad: 710L Medidas: 137*69*50 Capacidad: 470L Medidas: 137*34*50 Capacidad: 230L Medidas: 104*104*50 Capacidad: 540L Medidas:104*69*50 Capacidad: 360L Medidas: 104*34*50 Capacidad: 170L Medidas: 71*34*50 Capacidad: 120L -12-
ES NOTAS 1. Para realizar la limpieza diaria de este producto, no use cepillos, ni productos abrasivos como el carbonato cálcico ya que podrían dañarlo. Utilice una esponja humedecida en un detergente neutro para limpiarlo, y luego séquelo con un paño. 2.Si antes de instalar el producto lo ha tenido al exterior con una temperatura inferior a 0 grados centígrados, debe esperar a que coja la temperatura ambiente interior (superior a 0 grados) para montarlo. Antes de realizar la instalación 1.