IN230400286V01_US 3ZT
Do not interconnect parts of this lighting chain with parts of another manufacturer's lighting chain. Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed-off before use. Warning This tree is for INDOOR use ONLY. The tree base MUST be placed on a flat rigid surface. 1.For indoor use only, Do not use outcoors or in moist/humid conditions. 2.Do not operate in a confined space or allow contact with flammable material. 3.
PART ST LI A C 1 D 1 1 B 1 E 3 01 NOTE:Please remove the circular protector caps on the end of each pole before assembling. If the caps were broken, It will not affect the use of.
03 04 A B C Connect all the corresponding plugs. 05 Shaping Your Tree Please assemble the tree with glove. Start at the bottom of the tree and ensure that each branch has fallen fully into place. Carefully adjust any branches as needed to evenly space them. With each branch, separate out the individual tips and angle them out and away from the center of the tree.