MASSAGE CHAIR 700-088 C000000
Congratulations on having purchased our massage armchair. Please read this instruction manual carefully before using it (especially the points regarding safety) in order to use the armchair correctly. Keep this manual somewhere close by so that you can always refer to it if needed. Safety Rules.......................................................................3 The armchair parts...........................................................4 Functional Description of Massager ...........................
SAFETY RULES •Never set the armchair in wet/damp areas or where dust c a n accumulate as these could cause an electrical fault or a mechanical dysfunction. • Never use the massage armchair inside your home if the room temperature is over 40°C. •Never place the armchair near a heat source (oven, chimney, etc...) or indirect sunlight.
Disassembling the massage armchair: • Do not remove the back of the armchair . • Do not try to disassemble or repair the armchair yourself. Correct way to handle the mαins plug: • Check that you have the right voltage. • Never use force on the cable or plug. • Never pull the cable with wet hands. •When removing the plug, hold the plug itself, do not pull on the cable. •Do not use the armchair massage system if either the cable or the plug are damaged.
Functional Description of Massager I. Graphic presentation of Controller 1. POWER: turn on/off selection key 2. HEAT: heating on/off key 3.INTENSITY: High/Low 4. MODE: working mode 5. BACK: back massage 6.LUMBAR: lumbar massage function 7.THIGH: thigh massage function selection key 8.LEG: leg massage function selection key 9. TIMER: set working time key II.
Massage Areas • The arm chair comes in two parts that are easily assembled and easy to clean. •It has 1 hand control unit for controlling the massage functions. -8 vibratin massage points,heating function in the lumbar region and 2 levels of intensity. -9 different types of massage. Resting Function&Close the Recliner Pull the switch inside the right armrest as shown and then recline the chair freely. Use your legs press hardly on the chair footrest to close the Recliner.
Principal characteristics of the armchair 1) Components: • Back, seat,armrest,footrest,1 control unit and the power supply. 2) Functions: •Reclining back, extendible footrest, lumbar region heating function, massage function and elevating function. 3) Usage: • Indoors, avoid high temperatures and wet or damp areas. Precaution: • Never sit on the hand control or place heavy objects on top of it • Do not drop the hand control on the floor. • Do not tug on the electric able.
Assembly Instructions: 1)Position the Arms so that they fits into the seat,you will hear a “click” when they are in place. 3)The pins must be connected correctly. 2) Position the Back(refer to point 1) Connect Recliner supply cable pins.Fit the pins properly in the manner shown in the image. Do not force them,they only have one correct position. 4)Pull the switch inside the right armrest as shown and then recline the chair freely.
Troubleshooting: If the armchair is not working, check the following chart. Make sure you turn the power off and unplug from the mains. If you have any questions, please contact us. Do not disassemble or repair any part of the armchair yourself.