Instructions / Assembly

Safety Information
WARNING: This is not a toy and is not intended for use by
children.
(A)Do not mix old and new batteries.
(B)Do not mix alkaline, standard (carbon-zinc), or rechargeable
(nickel-cadmium) batteries.
(C)Do not dispose of the battery in fire as the battery may leak and
explode.
(D)Use type “AA” batteries.
(E)Remove used batteries promptly.
(F) Remove batteries from battery box of lights which is not to be used
for an extended period of time.
Safe for Outdoor use.
Warning: Please note that changes or modifications not
expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
5PCS B/O Warm White LED Micro Dot Candy Cane
Light Set
SKU# 1003142986
Instruction of Battery box
Step 1: Carefully take the product out of the box. You will find the battery
box.
Step 2: Carefully open the cover of the
battery box. (See Fig. 1)
Step 3: Place three new “AA” batteries
(not included) into the holders according
to the “+” and “-” directions as shown in
Fig. 1.
Step 4: Press the button on the battery
box to choose light functions. Fig. 1
There are three choices: 1, 2, 3 for the button as shown in Fig. 2.
1. Lights on.
2. Timer Function. The lights will
automatically be on for 6 hours and then off
for 18 hours. This cycle will occur every day
unless setting is changed to “on” or “off”
position. When press “Timer” feature,
lights will flash once to remind you that
timer feature is activated.
3. Lights Off.
Fig. 2
Step 5: Press the button to “OFF” position when not in use to conserve
battery life.