Measurement Guide

REV. 3/14/17
Document:
MM.3344
#6 Top
#7b Wall Leans
“
“
#7a Wall Leans
“
“
or
#4b Treshold
Level
Drops
#3 Bottom
“
Centerline (dotted)
“
or
#4a Treshold
Level
Drops
Left Right
#8 Showerhead
Location
#6 Top
#7b Wall Leans
“
“
#7a Wall Leans
“
“
or
#4b Treshold
is Level
Drops
#3 Bottom
“
“
or
#4a Treshold
is Level
Drops
Left Right
#8 Showerhead
Location
Watch the video and record your measurements by the numbers. Include unit information
as well, concerning model number, metal finish, glass type, etc.
Watch the Video and measure your shower or tub stall ... follow these simple steps..
1. Mark Centerline of Unit on masking tape on with water
based marker
2. Determine and Mark the Max Height at the top of the unit
3. Measure the wall to wall distance at the Bottom of the unit
4. Determine if Threshold is Level or if it Drops
5. Measure the wall to wall distance at Middle of the unit
6. Measure the wall to wall distance at Top of the unit (at
max height)
7 (a-b) Left Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
7 (c-d) Right Wall: Determine if there is a gap between the wall and level at the top or bottom of the enclosure
8. Is the showerhead on the left wall of unit or on right wall, or both. If rain shower, put note in Comments
“
or
#4b Treshold
Level
Drops
“
#4b Threshold
Drops
(or leave blank)
“
or
#4b Treshold
Level
Drops
“
#4a Threshold
Drops
(or leave blank)
#7b Wall Leans
“
#7c Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7a Wall Leans
“
(or leave blank)
#7b Wall Leans
“
#7b Wall Gap
“
(or leave blank)
C
e
n
t
e
r
l
I
n
e
C
e
n
t
e
r
l
I
n
e
Centerline (dotted)
#5 Middle
“
#2 Max Height
“
#1 Mark the
Centerline
of Unit
#5 Middle
“
#2 Max Height
“
#1 Mark the
Centerline
of Unit
#7b Wall Leans
“
#7d Wall Gap
“
(or leave blank)
Model Number:
Metal Finish:
Glass Type:
Handle or
Towel Bar Type:
Comments:
How to Measure a Tub
or Shower Stall
See an associate for more options!