Assembly Instructions ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product {with 1 being {include) easy and 5 being difficult), For some products, two persons are recommended.
Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #A x B pes Bolt #2 x 4 pcs #B x 8 pes Leg Flat Washer pcs Lock Washer #D x 1pc Allen Wrench \ Due to the size and for weight of this product, iris highly recommended that the assembly should be done near the area of its intended location. Make sure you have enough space to move around during the assembly.
#Ax 8 pes . Carefully place the bench #8 x 8 pes (#1) facing down pes protected surface. Align the 4 legs #2) with the per-drilled holes on the corners of the bench Prepare 8 bolt assemblies by inserting FIRST the lock washer (#C) onto the bolt (#A) and then the flat washer {#B) onto the SAME bolt ir that order. insert the bolt assemblies through the per-drilled holes on the corners of the bench (#1) and secure those bolls using the Allen wrench (#0) to lock them with the 4 legs #2).
