User Manual

ANNEX
Special Commands
1.3 • 15.01.2007 89
10.3 Special Commands
The table below contains the special commands not part of the
default Windows CE command set:
Launch via the Start menu:
Start  Run  <Enter call command> or
Start  Programs  System
Special
command
Result
Reset Resets the skeye.pad XSL.
Terminates all running programs and restarts the
skeye.pad XSL. RAM data is maintained.
Suspend Switch off: RAM content is maintained (storage
battery on)
SysBackup Backs up all programs and data present in RAM to
the flash disk or restores programs and data from the
flash disk. This is recommended prior to a total
shutdown.
SysInfo Displays the operating system version and the device
number.