HODEDAH ® Assembly Instructions 2 people This instruction booklet contains important safety information, please read and keep for future reference. 90 mins ITEM # HI71DR-G (MOP-SP) 1 YR LTD 7 DRAWER CHEST 2 Box FRONT VIEW BACK VIEW Product Dimensions: Height 48.39" x Width 47.24" x Depth 17.76" Weight Capacity Per Drawer 25Ibs. Weight Capacity Per Shelf 25Ibs. www.Hodedah.
HODEDAH ® Phone Mon - Fri | 9:30 am to 5pm EST 1 - 855 - HODEDAH Email Send us an email Support@Hodedah.com Website Visit our website to open a case www.Hodedah.
HODEDAH ® · Never open more than one drawer at a time. · The use of tip-over restranits may reduce but not eliminate the risk of tip-over. Let's get started… Helpful hints, read before beginning assembly · Make sure you receive all boxes. If your item is packed in one box, box count will read 1 · · · · of 1, likewise if your item is packed in two boxes, box count will read 1 of 2 and second box will read 2 of 2. Read each step carefully.
HODEDAH ® Hardware List QTY 1 2 Screw M6 x 40mm QTY 20 Pcs 66 Pcs 20 Pcs Screw M4 x 32mm Pvc Cap 3 QTY 72 Pcs Screw M3.5 x 14mm *For # 15 Drawer Slides QTY 5 33 Pcs QTY 6 8 Sets Mini Fix Pvc Cap QTY QTY 9 QTY QTY 12 AIM 3 Pcs Hinges 10 QTY 6 Pcs Screw M 10 X 1/2 MM Shelf Support 11 170 Pcs 8 Pcs 1 Pc Allen Key QTY 8 Pcs Nail Pvc Dowel 8 7 13 3 Pcs QTY 28 Pcs Screw M6.
HODEDAH ® Accessories 14 * Fix On Side & Stand Panels Ⓐ , Ⓗ * Fix On Stand Panels Ⓗ , Ⓘ Drawer Slide - A * Fix On Drawer Side Panels Ⓠ Drawer Slide - B 4 QTY Handle 8 Pcs Screw M4 X 20mm 7 Sets *Fix On Side Panels A , H & I 15 * Fix On Drawer Side Panels Ⓡ QTY QTY 7 Sets *Fix On Side Panels Q & R 16 Pcs Important 1. Before you throw the package, please use the Check Box to identify the parts and hardware to ensure that you have everything you need. 2.
HODEDAH ® Parts List A Left Side Panel 1200x 413 x 15mm QTY B Kick Panel 1165 x 89 x 15mm 1 Pc D Front Strengthening Panel 773 x 76 x 15mm QTY Strengthening Panel -Front 773 x 76 x 15mm QTY E Back Strengthening Panel 773 x 76 x 15mm Partition Panel 376x 340 x 15mm QTY H Divider Panel 181x 413 x 15mm Back Panels 1140 x 397 x 3mm QTY 3 Pcs www.Hodedah.
HODEDAH ® Parts List P D rawer Front Panels -Big Drawers 793 x 180 x 15mm QTY Q Drawer - Left Side Panels 394 x 116 x 15mm 5 Pcs S Drawer End Panels -Small Drawers 324 x 111 x 15mm QTY Drawer Base Panels -Big Drawers 746 x 394 x 3mm QTY 5 Pcs Y Adjust Panel 376x 340 x 15mm R Drawer - Right Side Panels 394 x 116 x 15mm 7 Pcs T Drawer Base Panels-Small Drawers 353x 394 x 3mm 2 Pcs V QTY QTY 7 Pcs U Drawer End Panels -Big Drawers 714 x 111 x 15mm Drawer Base Supporting Panels 394 x 51
HODEDAH ® www.Hodedah.
HODEDAH ® Pre - Assembly Insert the mini fix ⑥ (nuts) with the cross arrow mark facing upward and Place the drawer slide A ⑭ onto the 2 holes area 1 5 6 A 6 A I K 's top thru aim to panel , & holes. (As shown) 2 I shown at left side panel and . Then tighten it with 2 screws ⑬ and 1 screw ③. Do the same for 13 the 5 other slide A ⑭. 5 6 Screw M6.2 x 10mm 24 Pcs. 5 Pvc Dowel 8 Pcs. 3 13 Insert pvc dowels ⑤, into 8 non thru holes as shown using hammer to gently tap them in. Mini Fix 6 Pcs.
HODEDAH ® Pre - Assembly 5 Insert mini fix ⑥ (nuts) with the cross arrow 5 5 Insert pvc dowels ⑤ to both end of the panels EL N A P 5 B, C, D, E, F, G & J as shown. mark facing upward and aim to the panel thru holes. (As shown) H 's top 5 J 6 5 LEF W 6 13 3 13 Using hammer to gently tap them in. PAN 14 5 EL D 13 5 3 EL N A P E 5 5 HT 3 RIG 13 14 5 H EL PAN 5 5 5 T V IE 5 W VIE 13 Insert pvc dowels ⑤ to edge of the EL F PAN 5 H panel 's non-thru hole as shown.
HODEDAH ® Assembly Of Small Drawers : 2 DRAWERS -Place panel Q and panel R on each side of panel N & O as shown. 4 4 Handle 2 Pcs. -Then, tighten screw ② to panel Q and panel R 's lower thru holes Handle Screw M4 x 20mm 4 Pcs. to fix them onto panel N & O. -Next tighten screw ② to panel Q and panel R 's upper thru holes to fix up to the panel S.
HODEDAH ® Assembly Of Big Drawers : 5 DRAWERS -Place panel Q and (1) panel R on each side of 2 2 U 2 Q 2 2 2 x5 R P 2 3 3 (2) 15 3 2 2 3 W 3 15 3 7 V R 2 Screw M4 x 32mm 50 Pcs. U Screw M3.5 x 14mm 30 Pcs. x5 Q P 3 2 (3) Q U V 4 Handle 5 Pcs. 4 P 4 4 Handle Screw M4 x 20mm 10 Pcs. R x5 (4) Q U Nail 80 Pcs. P COMPLETED www.Hodedah.com -Flip drawer with bottom side up, place panel V onto the drawer and align properly.
HODEDAH ® Step 1 * Fix Panel B onto Panel C by inserting the dowel onto the non-thru holes at Panel C as shown. * Fix Panel B,C,D,E,F,G onto Panel A by inserting the (Left) dowels onto the non-thru holes at Panel A. * Using allen key ⑧ to tighten screw ① from the 6 thru holes of panel A. F G E 1 8 1 8 D A 1 8 B 1 C 8 1 8 1 8 1 CAUTIONS Screw M 6 x 40mm 6 Pcs. 8 Allen Key 1 Pc. : When inserting the PVC Dowels to non-thru holes, don't push to hard.
HODEDAH ® Step 2 * Fix Panel B,C,D,E,F,G onto Panel I by inserting the (Right) dowels onto the non-thru holes at Panel I. *Place Panel H (with drawer slide A ⑭ downward and the small white roller facing frontward) onto panel G and panel F by inserting the (down) dowels onto non-thru holes at bottom area of panel H. Using allen key ⑧ to tighten the 2 screw ① from the middle thru hole of panel G and Panel F. * Using allen key ⑧ to tighten screw ① from the 4 thru holes of panel H.
HODEDAH ® Step 3 * Fix Panel J onto Panel I by inserting the (Left) dowels onto the non-thru holes at Panel I. * Using allen key ⑧ to tighten screw ① from the 2 thru holes of panel I. * Fix panel K onto panel J, B and C by inserting the (right) dowel onto the non-thru hole at panel K. * Using allen key ⑧ to tighten screw ② from 4 thru holes of panel K. H F A G I E 8 8 1 K 1 J D 1 1 8 8 C B 8 Screw M 6 x 40mm 6 Pcs. 8 Allen Key 1 Pc.
HODEDAH ® Step 4 6 6 Dowel / Mini Fix Installation Mini Fix Cap 8 Pcs. A 6 F H G L 6 6 6 K 6 F 6 H 6 G I E A D C B J Place and fix panel L onto panel A, panel H, panel I and panel K, and align properly by inserting the 8 (down) mini fix screws ⑥ onto the L-thru holes at top edge of panel A, H, I and K. At the same time, pushing and light tapping of panel L downward to have panel A, panel H, panel I and panel K 's upside dowel going onto panel L 's non-thru holes.
HODEDAH ® Step 5 * Lay the chest at face down position, Place the 3 back Panels M onto the back of the main unit, and join the 2 panel M togather with H-profile by slotting one side each of panel M into the track of H-profile. Then align them properly for nailing. * Then use hammer to nail the nails one by one and at center of 4 side edges. Gap between 2 nails should be about 100mm for all. Back View M 8 M 16 M K H I G C F L E A B 8 Nail 44 Pcs. www.Hodedah.com 16 H-PROFILE 1 Pc.
HODEDAH ® Step 6 * Lift up the main unit carefully and let it stand up properly. * Cover all the screw ① 's head with the pvc cap provided by pushing the cover's stem onto the hole of screw head one by one for all screws. 1 L 10 H Y I G 1 J 1 1 E 1 K A Y 1 D 1 C B 1 1 * Then take the adjusting panel Y and place it inside the right compartment by putting it on top the 4 shelf support as shown. 1 www.Hodedah.
HODEDAH ® Step 7 * Insert Hinges ⑪ into door panel X 's non-thru hole as shown, then tighten screw ③ through hinges ⑪ 's thru hole. 11 3 X 4 4 12 -Disassemble the lock ⑫ into 5 parts as shown,then install the lock ⑫ by insert the lock ⑫ 's cylinder into middle thru hole of panel then fix the lock up. -Tighten 2 screw ④ from inner side of panel X, X into the handle ④ holes. Screw M3.5 x 14mm 6 Pcs. 4 Handle 1 Pc. 4 Handle Screw M4 x 20mm 2 Pcs. 11 HINGERS 3 Pcs. 12 Lock 1 Set. AIM 3 www.
HODEDAH ® Step 8 * You can align the door panel X by tightening and losening the screw as shown. * Place hanging rod onto both panels I and K 's V-bracket. 18 L Y N X O P J K P Y A P P C P B Adju st 18 www.Hodedah.com HANGING ROD 1 Pc.
HODEDAH ® FITTING OF ANTI-TIP SAFETY STRAP STEP 1: · Attach the mounting bracket a to the furniture in the solid part below the top panel a few inches away from the side of the unit. · Screw b through the smallest hole of a . STEP 2: · Locate a stud in the wall behind the unit,does not have to be centered. BACK SIDE OF TOP PANEL · Place the other mounting bracket a on the wall stud 2 inches below the mounting bracket secured to the back of your unit.
HODEDAH ® Completion * Take all drawers (5 big and 2 small), and slide them (the white rollers at drawer slide at both side of drawers are to go into the track of the slides at each side panel.) all the way gently, one drawer by one drawer starting from bottom one. Enjoy & Thank you for purchasing from Hodedah! In the interest of our environment please dispose of all packaging thoughtfully. www.Hodedah.