EN V1.2.
HOW TO CONTACT US ON AMAZON? Step 1: Log in to your Amazon account. Step 2: Go to Your Orders. Select Problem with order in the list. Step 3: Click the "Ask a Question" button. Choose your topic from list displayed. Step 4: Select Contact seller. *If you purchased HITWAY products by other platforms or channels, please also find the corresponding seller contact support.
LANGUAGE LIST I Attentions.............................................................1-2 II Product Function Diagram.................................. 3-5 III Product Parameters...........................................6-7 IV Manual Control Instrument Panel Instruction....
ATTENTIONS Battery and Charging: Charge at 0℃～45℃, discharge at -20℃～60℃, keep the battery dry. Do not put the battery in acidic or alkaline liquid. Avoid rain and keep away from fire, heat and high temperature environment. It is strictly forbidden to connect the positive and negative poles of the battery reversely. It is strictly forbidden to damage,disassemble the battery or cause short-circuit.
After use, the bike can not be parked in the building hall, evacuation stairs, safety exits, and allowed to ride with more than the maximum load of the body (the maximum load is 120 KG) After use, the bike can not be parked in the building hall, evacuation stairs, safety exits, and After use, the bike can not be parked in the building hall, evacuation stairs, safety exits, andmust be parked correctly in accordance with the safety rules.
PRODUCT FUNCTION DIAGRAM Figure 1 (Whole vehicle diagram) Note: The product upgrade may cause the actual product you receive to be different from the sample in the photo, please don't worry, the specific functions are the same and will not affect your normal use.
Function introduction: (Picture 1) 1. Charging: Unscrew the plastic cover on the battery (Picture 1), connect the charger to start charging, when the battery is full and the indicator light of the charger changes from red to green, it means it is fully charged. (Picture2) (Picture 3) 2. Power on: Refer to Picture 2, turn on the battery switch; refer to Picture 3. Press and hold button to turn on/off .
3. Power display: After powering on, the dashboard lights up to display the power, and the power is divided into 5 grids, corresponding to high, medium and low power. 4. Headlights: Refer to Picture 3, long press the on/off the headlights. button to turn 5. Start: Power-assisted riding, short press to adjust to 1st gear after power on, step on the bicycle sprocket, start the motor to assist. If motor assistance is not required, turn off the power or turn off the battery or set the gear to 0.
PRODUCT PARAMETERS Outlook & Dimension Performance Parameters Parameter Standard Version Body Material Iron Carbon Structural Steel Color Gloss Black Unfolding Size 1870mm*630mm*1100mm Hub Form Spoked wheel Wheel Size 26inch Package Size 1560mm*240mm*840mm Gross/Net 37.5kgs/30kgs(82.67lbs/66.13lbs) Maximum Load 120kg (264lbs) Maximum Speed 32km/h (20mph) Mileage 55KM-120KM(Affected by load, temperature, road conditions, riding mode, etc. E.g: At 75kg and 25°C, the max.
Battery Type Battery Capacity Battery Rated Voltage Motor Rated Power Electrical Specifications Motor Form Motor Type Motor Rated No-Load Speed Charger Output Charger Input Features 18650 lithium ion power battery 14Ah 48V 750W Assist mode 26inch/high speed gear/spoke wheel brushless motor 390±10r/min 54.6V 2.0A 100~240V 50/60Hz 3.
MANUAL CONTROL INSTRUMENT PANEL INSTRUCTION Function description: 1. Display function Speed display, power assist display, power indicator, fault prompt, mileage display, voltage display, single boot time, 3.75mile/h boost, cruise control, brake indication, headlight display 2. Control, set function Power switch control, headlight switch control, 3.
Display content introduction 1.Voltage status level POWER 2.Multifunctional display area Total mileage ODO, single mileage TRIP (unit: mile, km), single boot time TIME, battery voltage VOL 3.Speed display area AVG：Average speed, MAX: maximum speed, SPEED: current speed; unit Mp/h, km/h 4.Bike power-assisted gear adjustment , 0-3 digital display and gear bar display; 5.
6.Instrument Status Code Meaning Status Code State Meaning E00 Normal Status E06 Battery Undervoltage E07 Motor Failure E09 Controller Failure E10 Communication Reception Failure E11 Communication Sending Failure Button Introduction The specific combination of buttons is as follows Use Introduction Button operation is divided into short press and long press. Specific operation explanation I 、 Switch LCD 1.
2. In the power-on state, press and hold the button to turn it off. II 、Change the assist gear In power-on state 1. Short press 2. Short press button, assist gear will be + 1 button, assist gear will be - 1 III 、Switch speed display area content 1. In the power-on state, long press the button and button at the same time to complete the display switching between the average speed, the maximum speed and the instantaneous speed. IV 、Set/release 3.75mile/h boost, cruise control, switch headlights 1.
2. When the bike is in the power-assisted running state, press and hold the button to enter the cruise control mode. Press any brake or turn the accelerator to exit cruise mode. 3. Press and hold button to turn the headlights on or off. V、Switch the content of the multi-function display area 1. In the power-on state, short press the display data in the multi-function area. button to switch the Note: 1.
