User Manual

Glider Model Function Descriptions

MX.SS Mix Switch Select

Current Mixing switches can be assigned to new other

switches for user convenience.

1.To set the MX.SS ,get to the

MX.SS screen with the Edit Up

Down keys (press at the same

time. and then search MX.SS

by pressing Edit Up or Down

repeatedly ). In the display has

to be exactly the same as like right diagram, (all switches must

be positioning on normal )

2. Pressing the Cursor Right to change the assign new Mix

Switch for your convenience .(refer to page 37- Default)

Current mixing switch will be showing by ashing channel

numeral and highlighted On or Off sign.

3. You can be assigned new

mixing channel by pressing

Data +Increase, -Decrease keys

or toggle switch . also you can

check the new assigned switch

which being set (by numeral

ashing ) or On or Off status..

4. To go to next switch assigning, current new assigned switch

have to be OFF. Current assigned switch is On, cannot move

next switch to assign.

Ex) After assigned PMX 1 switch, and then press Cursor Right

in order to move PMX 2 . at this time , PMX 1 Switch has to be

OFF. If PMX 1 switch is ON , we cannot move next switches .

5. Pressing the Cursor Right to

nd THRO function. This is only

can use in Glider type. Current

3CH function (Motor On/Off or

Spoiler) can be assigned by

throttle Stick or other switches .

if you want to assign this function to throttle stick, STICK sign

in the display have to be ashing(being select) . You can select

STICK sign through pressing the DATA + , DATA- key. If you

assigned this function to throttle stick , you cannot nd SET

function in the CROW menu.

Flashing

your sailplane. If you have a nearby slope, practice ying

on very light lift days, where you can just barely keep the

model airborne. It is under these conditions that you

learn whether your model is really trimmed properly.