Workshop Manual

UPPERSTRUCTURE / Pilot Valve
W2-7-12
3. Install the lever (11) assembly to pilot valve (15).
Secure the lever (11) assembly to pilot valve (15)
with lock nut (12).
: 22 mm
: 55 N⋅m (5.5 kgf⋅m, 41 lbf⋅ft)
4. Connect the connector of wire (14).
5. Install wire (14) to pilot valve (15) and bracket (5)
with clip bands (13) (2 used).
6. Install cover (18) to bracket (5) with bolt (19).
: 10 mm
: 3.3 to 4.2 N⋅m
(0.3 to 0.4 kgf⋅m, 2.4 to 3.1 lbf⋅ft)
7. Install cover (7) to bracket (5) with screw (6).
8. Install the bracket (5) assembly to stand (16) with
bolts (17)(3 used).
: 17 mm
: 50 N⋅m (5 kgf⋅m, 37 lbf⋅ft)
9. Install covers (18, 7) to bracket (5) with screw
(10).
W1JB-02-07-005
W1JB-02-07-010
W1JB-02-07-008
W1JB-02-07-016
5
16
17
5
18 19
14
13 12 11
6
7
10
7
15
5
18