User manual

4 307906
MOVING PARTS HAZARD
Moving parts can pinch or amputate your fingers or other body parts.
D Do not cycle the pump with any parts disassembled.
D Keep clear of all moving parts when you start or operate the pump.
D Before you service the equipment, follow the Pressure Relief Procedure on page 8 to prevent
the equipment from starting unexpectedly.
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames, or sparks can cause a hazardous condition and
result in a fire or explosion and serious injury.
D Ground the equipment and the object being lubricated. See Grounding on page 6.
D If there is any static sparking or you feel an electric shock while using this equipment, stop
dispensing immediately. Do not use the equipment until you identify and correct the problem.
D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being dispensed.
D Keep the dispensing area free of debris, including solvent, rags, and gasoline.
D Do not smoke in the dispensing area.
WARNINGWARNING
United States Government safety standards have been adopted under the Occupational Safety and Health Act. You
should consult these standards––particularly the General Standards, Part 1910.