User Guide

44
(TAPE NAVIGATION)
Controls TV Screen
Cassette without Tape Navigation data
If a cassette which was not recorded on this VCR
is inserted, the VCR will check the Tape Navigation
data. The TAPE NAVIGATION button will flash for
a few seconds and the VCR will prompt you to
input the type of tape.
1
Press the TAPE NAVIGATION button on the VCR or
the NAVI button on the remote control.
The search menu will appear on the TV screen,
and the TAPE NAVIGATION button will flash for a
few seconds in search mode.
If the VCR cannot find the tape data, “NO TAPE
NAVI DATA” will appear on the TV screen.
Broadcast without PDC signal: The programme
data will not be split.
2
COMMERCIAL ADVANCE
PROG
REC/
IRT
REV
FWD
TAPE
NAVIGATION
TAPE NAVIGATION button
FWDREV
INDEX
ENTER
MENU
PROG
PROG
AUXVCR/TVOPERATE
MOVIE TEXT
CA
REC
NAVI
TV
NAVI
DATE
SEARCH I NG
START i n m CH
Exit
=
NAVI
––––– GORPIVANEPAT N o
DATE
DATANO T A P E NAV I
START i n m CH
Exit
=
NAVI
––––– GORPIVANEPAT N o
Broadcast with PDC signal: The programme data
will be split into three sections.
This splitting phenomenon occurs for programmes
broadcast with the PDC signal in normal, IRT and
timer recording modes.
If the PDC signal changes during recording, the split Tape Navigation data of recorded programmes will be
displayed on the programme list.
Example: If you have recorded a programme from 15:00 to 18:00, and broadcast send three programmes.
Splitting Tape Navigation data of recorded programmes broadcast with PDC signal
DATE START i n m CH
219
/
51
15GORPIVANEPAT
15 : 00 801 SP
1
N o
SP 02
SELECT
SOAP
/
/
Exit
NAVI
& 6
2
3
DATE START i n m CH
2
/
51
259
9
2
1
1
1
/
51
9
/
1
17 : 00
16 : 00
6
35GORPIVANEPAT
0 SP
60 SP
SP
15 : 00 60
1
N o
SP 02
SELECT
SOAP
/
/
Exit
NAVI
& 6