Owner's Manual

PROBLEM GUIDE/MAINTENANCE

Problem guide

No power • Make sure the VCR is plugged into an AC outlet.

Remote control doesn't work • Make sure the batteries are fresh, and properly installed.

Won't record • Safety tab has been removed from cassette (VCR will

automatically

eject the tape).

Won't play back • Make sure the TV/VCR switch is set to the VCR mode.

• Make sure the TV is set to the VCR channel (3 or 4) or AUX (if

using direct audio/video hookup).

Won't make timer recordings • The VCR power must be turned off to activate timer

recording.

• Clock is not set correctly.

• Programs entered incorrectly.

• Programs exceed the length of the cassette. Use the EP recording

speed for maximum programming.

• Safety tab has been removed from cassette.

Snowy picture in playback • Snow or picture noise is normal during search, still, and slow

Playback.

• Head cleaning may be required.

• Tape is worn or of inferior quality - adjust tracking controls.

Snowy picture in normal TV • Check antenna or cable connections.

viewing

Clock shows --:-- • Power has been interrupted - reset the clock.

• Reset the clock.

Erratic VCR display • Push the reset switch (behind the cover on the VCR front) with a

sharp pointed instrument (pen, toothpick, etc.)

Maintenance

Regular periodic maintenance is required to maintain optimum VCR performance. Such

maintenance and adjustments should not be attempted by the user. Please consult your

service dealer for further information.

Auto Head Cleaning System

This system cleans the video heads automatically when a cassette is inserted and ejected or

the VCR is turned on or off while a cassette is in the VCR, to prevent dirt from accumulating on