User manual

Ch 2: System Environment Setting
34 Hitachi VisionBase 8880R Server
What You Can Do on the Boot menu
Figure 23 Boot Menu Screen
Specify the priority of devices to boot/load. To change priority, move the cursor to the device, then use and
keys. It is recommended to use the following defaults:
1.
Diskette Drive
2.
Hard Drive
3.
ATAPI CD-ROM Drive
4.
Symbios Logic CD-ROM
Pressing key while “Press <F2> to enter SETUP” is being displayed will start the boot device selection menu.
Under ordinary circumstances, do not press key.
NOTE:
When PC98-compatible SCSI boards such as PC-CS7331 or PC-CS7231A are installed, more devices
might be displayed.
Hard Drive (IDE Hard Disk Drive)
Used to specify the order of booting for the hard disk. Check whether the display is the same as the following:
1.
Bootable Legacy Device
NOTE:
When PC98-compatible SCSI boards (such as PC-CS7331 or PC-CS7231A) or IDE devices are installed,
more devices might be displayed.
An incorrect setting in Hard Drive will disable the OS to be started.
1. [Diskette Drive]
2. [Hard Drive]
3. [ATAPI CD-ROM Drive]
Hard Drive
PhoenixBIOS Setup Utirity
F1 Help
↑↓ Select Item
←→ Select MenuESC Exit
-/+ Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit Sub-Menu
Item Specific Help
Main Advanced Security Boot Exit
+
–
Esc
Esc