Operation Manual

16
AV4 can be connected to the equipment with either Component or Composite output. Depending on whether the Y/
VIDEO input of your selected equipment is Y signal or Video signal, it will automatically be detected as Component
or Composite. When using as Composite, do not insert the jacks into P
B
or P
R
.
If your external device has a Component terminal, COMPONENT connection is recommended for
higher quality picture
.
Monitor Out can be used to display same image as main unit on another monitor.
When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from
composite(AV1~5), or RF signal can be displayed to the external monitor.
NOTE
• Video output is not available from component or HDMI input.
Optical Out (Digital Audio) terminal can be connected to an audio amplifi er with Optical Audio input.
NOTE
• Optical Out (Digital Audio) accepts PCM only.
[Example]
OUT
IN
[Example]
Stereo System Amplifi er
OUT IN
IN
CONNECTION (continued)
Connecting Procedure (continued)
OUT
Set-Top Box
DVD player/recorder
VCR
[Example]
Monitor