User Guide

Performing Cross-OS File Exchange Operations 5-27
Hitachi USP V Cross-OS File Exchange User’s Guide
Using FCU from the Command Line (Windows)
To perform FX file transfer operations for Windows 2000/2003/Windows NT
systems in a non-GUI environment:
1. Log-in as a user who has administrator privileges.
2. Open the command prompt (DOS Windows) and input the parameters below:
– fcunw [-cl] [param] ( [-v] )
– -cl : Specifying that all the log file for FCU will be cleared before
stating FCU.
– param :This parameter is used as same as (1) in this section for
UNIX.
Note: When this parameter is not specified, the file name of the “Parameter
definition file” will be assumed to be “fcudata.prm” and it will attempt to read
the detail parameters from the file.
– -v : This displays the version of fcunw.
Note: This parameter cannot be used with any other parameter
simultaneously, as it specifies versions.
– [Return value] 0 : Normal end
– [Return value] 1 : Error end.
Note: The fcunw command requires the “Parameter definition file” to function
properly. If there is no “Parameter definition file” or if there is an incorrect
parameter in the “Parameter definition file”, the following message will be
displayed:
– [ A parameter definition file doesn’t exist, or it is illegal. ]