Computer Drive User Manual

Using the Storage Navigator GUI 3-33
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
• Primary Server Output Folder: You can set the folder location to save
the audit log file. The folder location should be relative to a home directory
of a FTP server user. The default setting (/) is the home directory. You can
enter up to 256 alphanumeric characters and symbols (ASCII codes) for
the output folder.
• Transfer to Primary Server: When you click Transfer, the audit log file
is transferred to the primary FTP server according to the settings selected
on the Audit Log window. You can transfer the current audit log file without
waiting for the audit log file to reach the threshold size for automatic
transfer.
• Output to Secondary Server: You can specify whether to transfer the
audit log file to the secondary FTP server. To transfer the file, select
Enable. To not transfer the file, select Disable.
• Secondary Server Setting: You can set an IP address for the secondary
FTP server. Once you set Output to Secondary Server to Enable, IP
becomes available. The default IP address has been entered, so change it
as needed. The restriction for the available values is the same as that of
Primary Server Setting.
• Secondary Server Login User: You can set User ID and Password to
log into the secondary FTP server. The restriction for the available values is
the same as that of Primary Server Login User.
• Secondary Server Output Folder: You can set the folder location to
save the audit log file. The folder location should be relative to a home
directory of a FTP server user. The default setting and the restriction for
the available values are the same as those of Primary Server Output
Folder.
• Transfer to Secondary Server: When you click Transfer, the audit log
file is transferred to the secondary FTP server according to the settings
selected on the Audit Log window. You can transfer the current audit log
file without waiting for the audit log file to reach the threshold size for
automatic transfer.
• SIM Complete: The Request button allows you to complete (resolve) the
SIM which occurs when transfer of audit logs to any FTP servers fails.
Resolve the error condition, manually transfer the audit log file by clicking
Transfer, and then complete the SIM. The SIM status will change to
Complete.
Important: If you do not complete the SIM, the SIM will not occur the
next time an FTP transfer fails.
• Apply: The Apply button allows you to make all the settings made on the
Audit Log window effective. This button is available only when you are in
the modify mode.
• Cancel: The Cancel button allows you to cancel all the settings made on
the Audit Log window in the modify mode. This button is available only
when you are in the modify mode.