Computer Drive User Manual

2-14 Installation Requirements and Procedures
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Storage Navigator Conventions
General Parameters
• On most Storage Navigator windows, if you specify different settings for
the values on the window, the text color of that value changes to blue or
the icon changes, but the changes are not implemented until you click
Apply. Table 2-5 describes the text colors and font types displayed on the
Storage Na
vigator windows.
Table 2-5 Text Color and Font Type Displayed on Windows
Color and font
type
Description
Blue bold italic
Indicates that you have changed settings on the window, but the changes are
not yet implemented. To implement the changes, click Apply.
Red italic
Used for Performance Monitor and Server Priority Manager. For more
information, see the Performance Manager User’s Guide.
Green bold
Used for the copy function of LUN Manager. For more information, see the LUN
Manager User’s Guide.
• You can create and store up to 20,000 settings or operations before
actually applying them to the storage system. To avoid a possible error, do
not apply more than 20,000 settings at a time.
• The layout of a Storage Navigator window is reset when you click Apply,
Cancel, Refresh (
) on the File menu, Refresh All ( ) on the File
menu, or when you switch tabs.
• When you click Refresh All ( ) on the File menu, the information in the
SVP is also updated. Therefore, the processing caused by Refresh All (
)
on the File menu takes time until it has been completed.
• If there is difference between the configuration information displayed on
the Storage Navigator and the actual configuration information that can be
recognized from the host, the configuration information displayed on the
Storage Navigator may be updated by clicking Refresh All (
) on the
File menu.
• Do not change the clock time of the Storage Navigator computer while you
are using Storage Navigator.
Log in to Storage Navigator again after you have changed the clock time of
the Storage Navigator computer.
• When the microprogram is being updated on the SVP, you must exit and
restart all Web browsers on the Storage Navigator.
• If a Storage Navigator user is applying settings, you are not able to log into
the Storage Navigator until after those settings have been applied. A wait
of longer than five minutes indicates an abnormal end, in which case you
need to exit and restart the browser.