Computer Drive User Manual

Using the Storage Navigator GUI 3-43
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
Following items are displayed in the LDEV list:
– SLPR: SLPR number and SLPR name.
– CLPR: CLPR number and CLPR name.
– LDKC:CU:LDEV: From the left the LDKC number, the CU number, and
the LDEV number are displayed. For detailed information, see Common
Elements.
– Emulation: Emulation type.
For an expanded (LUSE) volume, the emulation type of the each LDEV
is displayed.
For a DP-VOL, "(0V)" might be displayed after the emulation type (such
as, OPEN-V (0V)).
– MAX LBA: LDEV size recognized by a host.
– Capacity: Volume capacity. Open-system volumes are displayed in
gigabyte (GB), mainframe volume are displayed in cylinder (Cyl). For an
expanded (LUSE) volume, the capacity of the each LDEV is displayed.
– RAID: RAID level.
– Internal Volume Information: The hard disk type of internal volume
is displayed as follows:
The blank indicates fibre-channel drive.
An asterisk (*) indicates SATA drive.
A hyphen (-) indicates external volume.
– Parity Group: Parity group.
– Paths: Number of LU paths.
– Attribute: The attribute set for the volume is displayed as follows:
Pool (X): The volume is set as a pool volume (pool-VOL). X indicates
pool ID.
V-VOL: The volume is set as a virtual volume (V-VOL) for Copy-on-
Write Snapshot.
DP-VOL: The volume is set as a virtual volume (V-VOL) for Dynamic
Provisioning.
Reserved LDEV: The volume is set as a reserved volume of Volume
Migration.
JNL Volume: The volume is set as a journal volume.
System Disk: The volume is set as a system disk.
– External Volume Information: Information on the external volume
is displayed in the format of Vendor/ Product name/ Serial number/
Hard disk type. The hard disk type is displayed as follows:
The blank indicates fibre-channel drives.
An asterisk (*) indicates BD or SATA drive.
A hyphen (-) indicates internal volume.