Operation Manual

Once the TV has found all your local stations, they are then automatically

assigned a programme number and name, if available from the broadcast.

important note.

start A.P.S. (Auto Programming System)

When the TV is operated for the first time, installation wizard will guide you

through the process. First, language selection screen will be displayed:

• Use "up" or "down" buttons to select your language and press OK

button to set selected language and continue.

• After selecting the language, "Welcome!" screen will be displayed,

requiring you to set Country,Teletext Language and Scan Encrypted

options.

• By pressing "left" or "right" button, select the country you want to set

and press "down" button to highlight Teletext Language option. Use

"left" or "right" button to select desired Teletext Language.

• Press "down" button after setting Teletext Language option. Scan

Encrypted will be then highlighted. You can set Scan Encrypted as Yes

if you want to scan coded stations.Afterwards select the desired

Teletext Language.

• Press OK button on the remote control to continue and the following

message will be displayed on the screen:

• To select the "Yes" or "No" option, highlight the item by using "left" or

"right" buttons and press button.

• Afterwards, the following OSD will be displayed on the screen and the

television will search for digital terrestrial broadcasts.and analogue TV

Note: You can press MENU button to cancel.

• After all the available stations are stored, Channel List will be displayed

on the screen. If you like the sort channels, according to the LCN,

please select "Yes" and than press "OK".

• Press OK button to quit channel list and watch TV.

It is possible that the TV could find channels from more than one regional

transmitter. In this case the available transmitters will be shown on screen.

Use the navigation buttons to select the correct transmitter for your local

region.

50206388