Operating Instructions

EN-12
GETTING STARTED
Preparation
1. Attach the camera strap.
2. Open the battery/memory card cover.
3. Load the batteries with correct orientation as
shown.
4. Insert an SD/SDHC memory card (Optional).
 The camera has 16MB internal memory
(14MB available for image storage), but you
can load an SD/SDHC memory card (SDHC
memory card up to 4GB) to expand the
camera’s memory capacity.
 Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/memory card cover and make
sure it is locked securely.
 To prevent valuable data from being accidentally erased from an SD/SDHC
memory card
, you can slide the write protect tab (on the side of the SD/
SDHC
memory card) to “LOCK”.
 To save, edit, or erase data on an SD/SDHC memory card, you must
unlock the card
/

To prevent damaging of an SD/SDHC memory card, be sure to turn off the
power when inserting or removing the SD/SDHC memory card. If inserting
or removing the SD/SDHC memory card with the power on, the camera will automatically turn off.
 Be careful not to drop the batteries when opening or closing the battery cover.