Fault Codes DTC & Troubleshooting

Table Of Contents
5 APPENDIX
- 362 -
5.1.3 Error messages from the BASE SYSTEM
Error message Required action
Cannot reset PCs. Check the connection with the PCs and try it again.
LPU is running. After stopping, clear a battery
backup memory.
Stop the LPU and then clear the data in the backup memory.
A malfunction was detected while the battery
backup memory is clear. There is possibility that a
battery backup memory isn't cleared.
Check the connection with the PCs and try it again.
Cannot save memory dump. Check the connection with the PCs and try it again.
The specification of the save file is illegal. Check the file name of the memory dump file and solve the
problem.
The specification of the top address is illegal. Specify a proper address as the starting address for memory
dump saving.
The specification of the save size is illegal. Specify the correct memory dump save size with a hexadecimal
number.
The address is not inputted. Enter an address for the box for which an address has not been
input yet.
The network ID of IP address and broadcast address
is different.
Make the network address portion identical between the IP
address and broadcast address.
Invalid specification The IP address is set incorrectly. Set the correct address value.
A specified IP address is invalid. Check the address and solve the problem.
A specified IP address is already used at <Parameter
name>
Check the address and solve the problem.
The IP address of route xx is invalid. Check the address and solve the problem.
The IP address of route xx is already used at
<Parameter name>
Check the address and solve the problem.
https://www.truck-manuals.net/