Manual
REMOVING DISC
1set the power switch to
'POWER OFF' to turn the
DVD _[deo tamer ai
_e,co_der oK,
/ Press down tile DISC
ESEC'I button onc_ and
_e,le,ase It,
Ill il rtlOltlerlI, the cover of
disc insertion block will
open slightly:
3Gentlyopen th_ cow tutitilltstops,
When the cover Is fully
open, the dlsc will slightly
cofrte out _ofrt the disc
guide, and stop,
4 Rear,ova the
disc,
• It is recommended tha! you turn the DVD video camera/
" recorder o,_whell inserting or removing diS¢, in orper to
prevent faulty operation.
• Even after the DVD video cameraZrecorder is turned on,
the disc can be removed unless it is in recording status.
Hold down the DISC EJECT button for approximately 2
seconds, and then release it to remove _e disc. {The
DISC EJECT indicator on the LCD screen ,MII blink.) it is
recommended that you turn the DVD video cameraY
recorder off before inserting or removing disc to prevent
misoperation.
• DO not defach the petlery or AC adaplerlcharger unN the
DVD video camera/recorder is compieteiy turned off.
• DO not insert any_ing other than the 8 cm DVD-F_M or
DVD-R disc into the disc insertion block: Doing so could
cause malfunctions.
• Set the power S'MtCh fo "POWER OFF" to turn the DVD
video camera/recorder oft
When inserting or removing the disc, be careful not tO
touch the ir_ide of DVD video camera/recorder
(especially, the lena, of laser pickup).
• When inserting or removing the disc, connect a charged
batten] or AC adapter/charger to the DVD video camera/
rscorper: The disc cover will not open unless the DVD
video camera/recorder is powered
5 Gently push the se(:tIorl
lndlc_ited _PUSH CLOSE'
o,,the co,'erordisch,s_:rrlo,,_'_
block, to close the cover; _l_ i_=_
43