Instruction Manual

152
English
QR34962
Disc error. • Use another disc.
• See *3 on page 155.
22, 76
• Mismatch in recording information may be caused by editing
doneonsomedeviceotherthanthisDVDvideocamera/recorder.
Initialize the disc or use another disc.
• Initializing the disc will erase all data on it.
127
“DISC ERROR”
appears when an
attempt to release write-
protect is made.
Ifyou havewrite-protected a disc using the write-protect setting tool
(WPTOOL) that is equipped with the UDF driver contained on the
CD-ROM provided with this DVD video camera/recorder, you
cannot release the write-protect on this DVD video camera/
recorderasis.Usethewrite-protectsettingtoolonPCtoreleasethe
write-protect.

Disc full. Cannot
execute.
Delete unnecessary scenes before using this disc, or use another
disc.
101
Disc has no data. This message will appear when the
 button is pressed with a
disc inserted on which no still is recorded (It will appear if you
attempt playback or editing on Disc Navigation, but will not appear
if you press
 on camera through image.).

Disc has no Play List. Switching of play list was selected with no play list stored. 118
Disc includes protected
scenes. Delete scenes?
The disc may be software protected from a device other than this
DVD video camera/recorder. To release thiscase, use a device that
has executed software-protect.

Disc is full. Cannot add
control info.
The number of entered scenes has reached the limit that can be
entered, so the control information for generating thumbnails
cannot be added.
Combine several scenes or delete them.
101, 107
Disc is not formatted.
Format the disc now?
• Has the disc been initialized on a PC?
Choose “YES” and initialize the disc when using it on this DVD
video camera/recorder. Initialization will delete all data on the disc.
• See*2onpage155
127
DPOF is not set to a
scene.
Thismessagewillappearwhen“SlideShow:DPOF”is specifiedfor
the card to which DPOF was not set.
131
DPOF scenes over limit.
Cannot set DPOF
scenes.
The maximumnumberofscenes for which DPOF can be set is 999.
111
Drive overheat. Please
retry later.
ThetemperatureinsidetheDVDvideocamera/recorderis too high,
and reading or writing of the data on disc may not be performed
normally.
Turn the DVD video camera/recorder off and wait for a while. The
temperaturewill be effectively decreased if the DVD video camera/
recorder is placed in a well-ventilated spot.
45
DVD-R Disc, Video
mode cannot be
changed.
With DVD-R disc, the movie quality mode once used for recording
cannot be changed. 26
END OF DISC The disc is full.
You cannot record on this disc anymore. Prepare another disc or
delete unnecessary movie scenes from this disc.
26
End scene cannot be
divided.
Division is not possible at the end of scene.
108
Message Cause & Troubleshooting
Reference
page