Operation Manual

10
English
13 mm Hammer
Drill Chuck
(SDS plus shank)
Impact Drill Application
Straight Shank Bit
()
䡬 13 mm Hammer Drill chuck and Chuck wrench
Anchor size
W1/4"
W5/16"
W3/8"
3. Anchor setting
䡬 Anchor setting adapter (for rotary hammer)
Anchor setting adapter
(for rotary hammer)
(SDS plus shank)
Chuck wrench
䡬 Anchor setting adapter (for manual hammer)
Anchor size
W1/4"
W5/16"
W3/8"
W1/2"
W5/8"
Anchor setting adapter
(for manual hammer)
Taper mode Applicable drill bit
Morse taper (No. 1) Drill bit (taper shank) 11.0 – 17.5 mm
Morse taper (No. 2) Drill bit (taper shank) 21.5 mm
A-taper
Taper shank adapter formed A-taper or B-taper
B-taper
is provided as an optional accessory, but drill bit
for it is not provided.
Outer diameter
11.0 mm
12.3 mm
12.7 mm
14.3 mm
14.5 mm
17.5 mm
21.5 mm
4. Drilling holes and driving screws (rotation only)
䡬 Drill chuck, chuck adapter (G) and chuck wrench
Drill chuck (13VLR)
Chuck wrench
Chuck adapter (G)
(SDS plus shank)
Special
screw
01Eng_DH24DV_WE 08/12/8, 19:3210