user's manual Projector CP-X990W, CP-X995W

ENGLISH-15

ENGLISH

ENGLISH-15

((

))

Options Menu

The following adjustments and settings are available when OPT. is

selected on the menu. Select an item with the and buttons, and

start operation.

Table 7. Options Menu

VOLUME

MENU COLOR

LANGUAGE

AUTO OFF

SYNC ON G

WHISPER

SETUP INPUT OPT.

IMAGE

Item Description

VOLUME

Volume Adjustment: Reduce VOLUME ↔ Increase VOLUME

MENU COLOR

Select Menu Background Color: Select with the and buttons.

LANGUAGE

Operation Start/Stop: Press the / button.

Select Menu Display Language: Select with the and buttons.

AUTO OFF

Operation Start/Stop: Press the / button.

Set AUTO OFF: Set 1~99 minutes with the and buttons. The

system automatically enters the standby mode when a signal is not

received for the set time.

Clear AUTO OFF: Select STOP (0 min.) with the button. When

STOP is selected the system does not enter the standby mode even if

no signal is received.

SYNC ON G

Operation Start/Stop: Press the / button.

SYNC ON G Valid: Select TURN ON with the button.

SYNC ON G Invalid: Select TURN OFF with the button.

• May not be displayed correctly with some input signals when SYNC ON G is

valid. In such cases, remove the signal connector so that no signal is received,

set SYNC ON G to invalid, and reconnect the signal.

WHISPER

Set / Crear WHISPER Mode: Press the / button. When the

WHISPER is selected, the WHISPER mode is active. In the WHISPER

mode, acoustic noise level from the unit is reduced, and brightness level

on screen is a little lower.

01CP-X990W 02.3.8 11:03 AM ページ 15