User Guide

Automatic Tuning Procedure
Automatic Tuning Procedure
10
10
Menu
Picture
Audio
Time
Install
Features
Install
Language English
Auto Tune
Skip
Manual
= Back
= Select
= Enter
Menu
Exit
= Select
= Enter
Menu
Exit
Auto Tune
Position No 10
Frequency 471.25MHz
Auto tuning in progress
To automatically tune this TV to your local broadcasting stations follow the step by step guide below. Once
the TV has found all your local stations, they are then automatically assigned into the following order:
1: BBC1; 2: BBC2; 3: ITV; 4: CH4/S4C; 5: CH5 (subject to availability); 6: Satellite.
Alternatively, if you are familiar with local broadcasting frequency or CH numbers, then these can be
entered manually. Please refer to the Manual Tuning Procedure section of this booklet.
IMPORTANT
NOTE: If you have a VCR or a Satellite receiver connected to this TV please ensure
that they are switched on before Autotune commences. In the case of a VCR, insert a
pre-recorded tape and begin playback of your equipment. With a Satellite receiver, select SKY
NEWS. These measures ensure that all your equipment is tuned in during the AUTOTUNE
procedure.
Note: Should you experience any difficulties with your VCR playback, re-tune Programme 0 (Position
No. 0 ) to your VCR, as detailed in the Manual Tuning Procedure section of this manual.
Press the MENU button
on your handset until the
MAIN MENU appears.
Highlight INSTALL using the up/down
buttons.
Press the left/right buttons to select
INSTALL. The INSTALL menu is
shown.
1
2
3
If language setting is incorrect, use the
up/down buttons to highlight
LANGUAGE, and select using the
left/right buttons.
Use the up/down buttons to highlight
AUTO TUNE.
Use the left/right buttons to select
and begin AUTO TUNE.
4
5
6
MENU
Once complete, press the MENU
button repeatedly to exit.
7
P-
P+
-
+
P-
P+
-
+
P-
P+
-
+
MENU