Manual

TIPS ON REAR PANEL CONNECTIONS
S-VIDEO, Y-PBPR and HDMI
connections are provided for
high performance laserdisc
players, VCRs etc. that have
this feature. Use these
connections in place of the
standard video connection if
your device has this feature.
m,,__J _\ OutsideAntenna
orDigitalCabLe
.....i
ExternN
Digital
Component
with HDMI
output
capability
If your device has only one
audio output (mono sound),
connect it to the left audio iack
on the television.
Refer to the operating guide of
your other electronic equipment
for additional information on
connecting your hook-up
cables.
12
A single VCR can be used for
VCR #1 and VCR #2, but note
that a VCR cannot record
its own video or line output
(INPUT I in the example on
this page). Refer to your VCR
operating guide for more
information on line input-output
connections.
You may use VIDEO or
S-VIDEO inputs to connect to
INPUT 1, INPUT 2 or INPUT 5,
but only one of these may be
used at a time.
Connect only one component
{VCR, DVD player, camcorder,
etc.) to each input jack.
r--- 1
INPUT
s VIDEO e L R
@oo¢
L_ i
r--- 3 r I
VCR#2 Laserdise player, VCR, VCR #1 DVD Player
Camc0rder,etc.
COMPONENT: Y-PBPR (INPUT 3 and INPUT 4)
connections are provided for high performance
components, such as DVD players and set-top-
boxes. Use these connections in p(ace of the
standard video connection if your device has this
feature. INPUT 3 accepts both composite and
component video signals.
TOan
amplifier/
receiverwith
opticalinput
capability.
• To ensure no copyright infringement, the
MONITOR OUT output may be abnormal, when
using the Y-PBPR jacks.
• When using an HDMI input from a Set-Top-Box, it
is recommended that a 1080i or 720p input signal
is used.
Your component outputs may be labeled Y, B-Y,
and R-Y. In this case, connect the components
B-Y output to the TV's PB input and the
components R-Y output to the TV's PR input.
Your component outputs may be labeled Y-CBCR.
In this case, connect the components CB output to
the TV's PB input and the components CRoutput to
the TV's PR input.
te3 :,!,,_ t
You may use composite and component video
signals for INPUT 3 and INPUT 4.
It may be necessary to adjust TINT to obtain
optimum picture quality when using the Y-PeP£
inputs (see page 32).
|}NOTJ: