Manual

SETUP
Manual Convergence Adjustment Mode (9 Point Manual Adjustment)
NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature. I
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
I
3. If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased.
Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-9 POINT MANUAL-START to
access convergence 9 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the adjustment point cursor using the CURSOR buttons, the Adjustment Cursor must be WHITE. Another way to move the
Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the
adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
Jvi deo ]_
JChan. Manager
gi ..... |
m
Mo_ _EL) Sel I
_etup
mMo_c iO
mset the _uts m
reset virtual i_(> m
mSet _ack Side _a_el m
mSet closed Captio_s m
mset Mo_ito_ Out M
HsetuP U
Aligns the Red, Green, and Blue
colors 1_o correct for Magnetic
i_fl uences.
AdjustmeNt Mode
Auto D At _urn off,
(After 9O days).
®9 Point _anual
117 Point Manual
if you want to adjust now-=_
[ _ Move _EL _
4.
4.
Adjustment Point
,Cursor
÷//÷
14.1 4.
q- q- 4-
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
EXET0
Setup
Manual Adjust
Please make a selection from
the options below
[ _ Move _ Select ]
Use the CURSOR buttons to highlight your chosen option. Press the SELECT button to select.
Select CANCEL to cancel adjusted data and return to main picture.
Select DONE to save your adjustments and return to main picture.
Select BACK to return to the manual convergence adjustment mode.
Select RESET to recall the factory pre-set convergence data.
56