Owner's Manual

USING YOUR REMOTE

TO CONTROL VCR/PVR FUNCTIONS

Operating the precoded function for your VCR/PVR (Personal Video Recorder).

This remote is designed to operate different types of VCRs/PVRs. You must first program the remote to match the remote system of

your VCR/PVR (refer to pages 38-39 for pre-codes).

1. Turn ON your VCR/PVR.

2. Aim the remote control at the front of your VCR/PVR.

3. To switch to VCR/PVR pre-coded mode, use the SOURCE ACCESS buttons ( , ) on the remote control to position the LED light

to the corresponding selection.

4. Hold down the ENT button on the remote and enter the four digit preset code that matches your VCR/PVR, as shown on pages 38-

39. Release the ENT button. The indicator light will flash 3 times if the code was accepted.

5. Aim the remote at the VCR/PVR and press the POWER button. The remote will turn off your PVR when the correct four digit pre-

set code is entered. When this occurs, the remote control is programmed for your VCR/PVR. If the VCR/PVR does not turn off,

try a different four digit preset code.

6. The remote will now control your VCR/PVR.

NOTES:

1. If your PVR cannot be operated after performing the

above procedures, your PVR’s code has not been

precoded into the remote.

2. In the unlikely event that your PVR cannot be operated

after performing the above procedures, please consult

your PVR operating guide.

3. The remote control will remember the codes you have

programmed until the batteries are removed from the

remote control. After replacing the batteries repeat the

entire programming procedure as stated above.

4. VCR precode library is included in the PVR mode.

Default device for this mode is Hitachi VCR.

5. INFO, GUIDE and LC (Last Channel) buttons are for PVR

devices, not for VCR.

 PRECODED VCR/PVR Buttons

These buttons transmit the chosen precoded VCR/PVR

codes.

 EXCLUSIVE TV Buttons

These buttons are for operating the TV.

GUIDE









C.C.



MY VCR/PVR CODE IS:

NOTE: Refer to instruction manual of the VCR/PVR for operation of the buttons exclusively for the VCR/PVR.

THE REMOTE CONTROL