Owner's Manual

HOW TO USE THE REMOTE TO

CONTROL YOUR TV

Jump

Slideshow

Rotate

Slideshow

Jump

Slideshow

Rotate

5 sec

Start

Interval

5 seconds

5 seconds.. etc.

SLIDESHOW

Select this menu item to start a slideshow of the Photos in the memory card. Time interval selections can be set from 5, 10 and

30 seconds.

Use CURSOR PAD ,  to highlight Slideshow item.

While interval is highlighted, press SELECT to change interval time from 5, 10 and 30 seconds. Each press will change interval

time from the three mentioned choices.

Press SELECT to stop on a chosen picture of the slideshow. After 30 seconds, the slideshow will resume, or press SELECT again

to continue the slideshow.

Press EXIT to exit the slideshow.

Jump

Slideshow

Rotate

1/10

ROTATE

Select this menu item to rotate selected photos either clockwise (CURSOR PAD ) and counterclockwise (CURSOR PAD ).

Rotate menu item is also available in THUMBNAIL view.

NOTES: 1. Automatic contrast reduction also applies during SLIDESHOW, then press any button to continue.

2. Photo file names modified on a computer should be 8 characters (Ex. ABCD1234.jpg). 1st character: letters;

2nd to 4th: letters or numbers; 5th to 8th: numbers. Photo files should be first placed on a sub directory name

with 8 characters (Ex. 123ABCDE). 1st to 3rd: number; 4th to 8th: letters. The sub directory then should be placed

on a main directory with a “dcim” file name format.

3. Supported image types are up to 3072 x 2304; JPEG format should conform with DCF Standard (Design rule for

Camera File System).

4. This TV set displays only digital pictures from digital cameras which meet DCF Standard. Pictures that were copied,

edited or modified on a computer may not be displayed on the TV set.

THE REMOTE CONTROL