Datasheet

Z5K500 OEM Specifications
102
14.15 Read DMA Ext (25h)
Command Block Output Registers Command Block Input Registers
Register 7 6 5 4 3 2 1 0 Register 7 6 5 4 3 2 1 0
Data Low - - - - - - - - Data Low - - - - - - - -
Data High - - - - - - - - Data High - - - - - - - -
Current - - - - - - - - Error ...See Below... Feature
Previous - - - - - - - -
Current V V V V V V V V HOB=0 - - - - - - - -Sector Count
Previous V V V V V V V V
Sector Count
HOB=1 - - - - - - - -
Current V V V V V V V V HOB=0 V V V V V V V VLBA Low
Previous V V V V V V V V
LBA Low
HOB=1 V V V V V V V V
Current V V V V V V V V HOB=0 V V V V V V V VLBA Mid
Previous V V V V V V V V
LBA Mid
HOB=1 V V V V V V V V
Current V V V V V V V V HOB=0 V V V V V V V VLBA High
Previous V V V V V V V V
LBA High
HOB=1 V V V V V V V V
Device - 1 - - - - - - Device - - - - - - - -
Command 0 0 1 0 0 1 0 1 Status ...See Below...
Error Register Status Register
7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
CRC UNC 0 IDN 0 ABT T0N AMN BSY RDY DF DSC DRQ COR IDX ERR
V V 0 V 0 V 0 0 0 V 0 V - 0 0 V
Table 70 Read DMA Ext Command (25h)
The Read DMA Ext command reads one or more sectors of data from disk media, then transfers the data
from the device to the host.
The sectors are transferred through the Data Register 16 bits at a time.
The host initializes a slave-DMA channel prior to issuing the command. The data transfers are qualified
by DMARQ and are performed by the slave-DMA channel. The device issues only one interrupt per
command to indicate that data transfer has terminated and status is available.
If an uncorrectable error occurs, the read will be terminated at the failing sector.
Output Parameters To The Device
Sector Count Current
The number of sectors to be transferred low order, bits (7:0).
Sector Count Previous
The number of sectors to be transferred high order, bits (15:8). If 0000h in the
Sector Count register is specified, then 65,536 sectors will be transferred.
LBA Low Current
LBA (7:0)
LBA Low Previous
LBA (31:24)
LBA Mid Current
LBA (15:8)
LBA Mid Previous
LBA (39:32)
LBA High Current
LBA (23:16)
LBA High Previous
LBA (47:40)
Input Parameters From The Device
LBA Low (HOB=0)
LBA (7:0) of the address of the first unrecoverable error.
LBA Low (HOB=1)
LBA (31:24)of the address of the first unrecoverable error.
LBA Mid (HOB=0)
LBA (15:8)of the address of the first unrecoverable error.
LBA Mid (HOB=1)
LBA (39:32)of the address of the first unrecoverable error.
LBA High (HOB=0)
LBA (23:16)of the address of the first unrecoverable error.
LBA High (HOB=1)
LBA (47:40)of the address of the first unrecoverable error.