User's Manual

11 / 13
5. Hardware specifications
5. Hardware specifications
*1: If the finger positioning is incorrect, authentication may fail even with the applicable finger
width.
*2: It is recommended to connect the FV Unit directly to the USB port of your PC. If you need
to connect the FV Unit via a USB hub, use a self-powered hub.
*3:When you reconnect the FV Unit to your PC after a disconnection, use the same USB port to
which the FV Unit was connected.
*4:When FV unit is connected to the USB 3.0 port, FV unit is recognized as a USB 2.0 device.
Name
USB Finger Vein Biometric Authentication Unit
Model
PC-KCB100
Applicable finger width *1
Wider than 10 mm/0.4 inch and narrower than 25 mm/1 inch
Interface
USB 2.0 *2 *3 *4
Dimensions
Approx.
59mm/2.3inch(W) x 82mm/3.2inch(D)x 74mm/2.9inch(H)
(USB cable not included)
Weight
Approx.
102g/3.4oz (USB cable not included)
Maximum Current
Consumption
DC 5V 500 mA (Bus powered)
Environment
Conditions
(Operation)
Operating
temperature
5 to 35 degrees C (41 to 95 degrees F)
Operating
Humidity
20 to 80% Rh (Do not allow condensation)
Environment
Conditions
(Storage)
Storage
Temperature
-10 to 60 degrees C (14 to 140 degrees F)
Storage
Humidity
20 to 80% Rh (Do not allow condensation)
SIM card
ISO/IEC 7810 ID-000 sized