Specification
2
Description
HIT140 is a Portable DC MIG
capable of welding with solid (with
shielding gas) or flux core wire.
Power requirements are 120VAC ,
60HZ/20 amp with time delayed
fuse or circuit breaker.
Features infinite heat/voltage settings
and wire speed, spool gun ready, spot timer
over load and thermal protection.
For use with or with out shielding gas, designed for mild steel and
stainless steel welding in construction, automotive repair and light
industrial.
Welds mild steel between 24 gauge to 3/16” in a single pass.
Specifications and Dimension
DESCRIPTION SPECIFICATIONS
Power supply 1 phase-120V-60HZ
No-load voltage 29V
Output Range
20-90APeak140A
Duty cycle 20%
Suggested wire MIG and Flux core wire
Wire Diameter .023", .030", .035"
Dimension (L x W x H) 17.3" x 9.5" x 14.4"
Weight 54 Ibs
Removing from carton
1.1 Remove cartons, bags or Styrofoam containing the welder and accessories.
1.2 Check the contents with the packing list below.
1.3 After unpacking the unit, inspect carefully for any damage that may
have occurred during transit. Check for loose or damaged parts.
ITEM QTY.
Portable MIG Welder 1 unit
MIG torch 1 piece
Ground cable/clamp 1 piece
Gas hose 1 piece
Contact tips 2 pieces
Gas regulator 1 piece
MIG nozzle 1 piece
L” shaped hex wrench
1 piece