Installation Instruction

Page 5
Step 3: Tighten two screws through the Vest and nuts, see picture 3
P-Tag Base Plate
Picture 1
Picture2 Picture 3
4.2.3. Installation on arm or wrist: Bind the Velcro band through the two holes on the
P-Tag and, hoop the Velcro Band on arm or wrist, and then tie the Velcro Band using
the buckle.
move the P-tag close to the buckle end of the Velcro band
on the arm on the wrist
4.3 Alarm Flash Light and Audio Speaker