Operating Instruction DD VP-U (01)

4 Technical data
Right of technical changes reserved.
Rated voltage 120 V
Rated current: see motor rating plate 3 A
Power input 350 W
Frequency 60 Hz
Protection class Grounding
Max. dispensing rate 6 m³/h (211.89 ft³/h)
Min. rel. vacuum 700 mbar (10.15 psi)
Dimensions (L x W x H) 383 X 154 X 282 mm (11.1")
Supply cord type SJTW 3x16 AWG, black
Mains plug Nema 5‑15
Supply cord length 4 m (13.12 ft)
Extension cord length 30 m (98.43 ft)
Extension cord type SJTW or equivalent; 120 V, min. 4 A
Weight 9.0 kg (19.84 lb)
Water separator capacity 0.5 l (0.13 gal)
Hose length 3 m (9.84 ft)
Hose diameter outside = 14 mm, inside = 10 mm
5 Safety instructions
WARNING! Read all instructions.Observe all
safety instructions given in the operating in-
structions for the Hilti power tool used. Failure
to observe the instructions could lead to seri-
ous injury.
5.1 Work area safety
Keep the work area tidy. Any objects which
may cause injury should be removed from
the area. Untidiness at the workplace can lead
to accidents.
5.2 Electrical safety
a) Appliance plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with grounded ap-
pliances. Unmodified plugs and matching
outlets reduce the risk of electric shock.
b) Protect yourself from electric shock.
Avoid body contact with earthed or
grounded objects such as pipes,
radiators, kitchen ranges and
refrigerators.
c) Store appliances out of reach of children
when not n use. Do not allow persons
unfamiliar with the appliance or these
instructions to operate it. Appliances are
dangerous in the hands of untrained users.
d) Disconnect the supply cord plug from the
power outlet before maintenance.
e) When operating an appliance outdoors,
use an extension cord suitable for out-
door use. Use of a cord suitable for outdoor
use reduces the risk of electric shock.
f) Check the appliance’s supply cord at
regular intervals and have it replaced
by a qualified specialist if found to be
damaged. If the appliance’s supply cord
en
3
Printed: 08.07.2013 | Doc-Nr: PUB / 5069640 / 000 / 01