Operating Instruction VC 300-17 X (01)

English 13
Trouble or fault Possible cause Action to be taken
The vacuum turbine doesn’t
start after cleaning the waste
material container.
The automatic cut-out is active. ▶
Set the control switch to the
position.
▶ Wait 5 seconds.
▶
Set the control switch to the
position.
The probes are clogged with dirt. ▶ Check the container level
monitoring system.
Suction power drops. The suction nozzle, tube, hose or
the filter are blocked.
▶ Remove the blockage.
The filter is clogged. ▶ Change the fabric dust bag.
Remove the filter cover. ▶ Close the filter cover.
The drainage hose leaks. ▶ Check the drainage hose for
leakage.
Dust is blown out of the appli-
ance.
The filter is fitted incorrectly. ▶ Change the fabric dust bag.
The automatic filter cleaning
system doesn’t work.
The suction hose is not connected. ▶ Connect the suction hose.
9 Disposal
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative for further information.
Drilling slurry
Disposal of drilling slurry directly into rivers, lakes or the sewerage system without suitable pretreatment
presents environmental problems.
▶ Ask the local public authorities for information about current regulations.
We recommend the following pretreatment:
▶ Collect the drilling slurry (for example, using a wet-type vacuum cleaner).
▶ Allow the drilling slurry to settle and dispose of the solid material at a construction waste disposal site
(addition of a flocculent may accelerate the settling process).
▶ The remaining water (alkaline, pH value greater than 7) must be neutralized by the addition of an acidic
neutralizing agent or diluted with a large volume of water before it is allowed to flow into the sewerage
system.
Drilling dust
▶ Dispose of the drilling dust collected by the vacuum cleaner in accordance with the applicable national
regulations.
10 Manufacturer’s warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 22.02.2017 | Doc-Nr: PUB / 5334135 / 000 / 00