Operating Instruction AG 600-A36 (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Before use
- 6 Operation
- 7 Care, maintenance, transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 2.1 Indications générales de sécurité pour les appareils électriques
- 2.2 Consignes de sécurité générales pour le meulage, le ponçage au papier abrasif, les travaux avec des brosses métalliques, le polissage et le tronçonnage :
- 2.3 Consignes de sécurité supplémentaires
- 2.4 Utilisation et emploi soigneux des batteries
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Système de protection thermique du moteur
- 3.5 Carter de protection avec cache avant
- 3.6 Capot dépoussiéreur compact pour travaux de tronçonnage DC-EX 125/5 C (accessoire)
- 3.7 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.8 Consommables
- 3.9 Indicateur de l'état de charge de l'accu Li-Ion
- 4 Caractéristiques techniques
- 5 Mise en service
- 5.1 Introduction de l'accu
- 5.2 Retrait de l'accu
- 5.3 Montage de la poignée latérale
- 5.4 Montage ou démontage du carter de protection
- 5.5 Montage ou démontage du cache avant
- 5.6 Positionnement du capot dépoussiéreur compact DC-EX 125/5 C
- 5.7 Montage ou démontage des outil amovibles
- 5.7.1 Montage de l'outil amovible
- 5.7.2 Démontage de l'outil amovible
- 5.7.3 Montage de l'outil amovible avec écrou à serrage rapide Kwik lock
- 5.7.4 Démontage de l'outil amovible avec écrou à serrage rapide Kwik lock
- 5.7.5 Montage de l'outil amovible avec filetage intégré
- 5.7.6 Démontage de l'outil amovible
- 6 Utilisation
- 7 Nettoyage, entretien, transport et entreposage
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 2.1 Indicaciones generales de seguridad para herramientas eléctricas
- 2.2 Indicaciones de seguridad generales para las aplicaciones de lijado, lijado con papel de lija, trabajos con cepillos de alambre, pulido y tronzado con muelas:
- 2.3 Indicaciones de seguridad adicionales
- 2.4 Manipulación y utilización segura de las baterías
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Protección de la herramienta en función de la temperatura
- 3.5 Cubierta protectora con tapa delantera
- 3.6 Protector antipolvo para trabajos de tronzado DC-EX 125/5 C cubierta compacta (accesorio)
- 3.7 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.8 Material de consumo
- 3.9 Indicador del estado de carga de la batería de Ion-Litio
- 4 Datos técnicos
- 5 Puesta en servicio
- 6 Manejo
- 7 Cuidado, mantenimiento, transporte y almacenamiento
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Protecção da ferramenta dependente da temperatura
- 3.5 Resguardo do disco com tampa dianteira
- 3.6 Dispositivo de extracção de pó para trabalhos de corte DC-EX 125/5 C (acessório)
- 3.7 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.8 Consumíveis
- 3.9 Indicador do estado de carga da bateria de iões de lítio
- 4 Características técnicas
- 5 Antes de iniciar a utilização
- 6 Utilização
- 7 Conservação, manutenção, transporte e armazenamento
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
2 English 2106619
*2106619*
1.3 Product-dependent symbols
1.3.1 Symbols on the product
The following symbols are used on the product:
Wear eye protection.
Rated speed
Revolutions per minute
Revolutions per minute
Diameter
1.4 Product information
products are designed for professional users and only trained, authorized personnel are permitted
to operate, service and maintain the products. This personnel must be specifically informed about the
possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
2 Safety
2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
▶ Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
Electrical safety
▶ Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
▶ Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
▶ Prevent unintentional starting. Ensure the switch is in the off‐position before connecting to battery
pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
▶ Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
▶ Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
Printed: 07.03.2018 | Doc-Nr: PUB / 5246614 / 000 / 01