Operating Instruction AG 600-A36 (02)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Before use
- 6 Operation
- 7 Care, maintenance, transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 2.1 Indications générales de sécurité pour les appareils électriques
- 2.2 Consignes de sécurité générales pour le meulage, le ponçage au papier abrasif, les travaux avec des brosses métalliques, le polissage et le tronçonnage :
- 2.3 Consignes de sécurité supplémentaires
- 2.4 Utilisation et emploi soigneux des batteries
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Système de protection thermique du moteur
- 3.5 Carter de protection avec cache avant
- 3.6 Capot dépoussiéreur compact pour travaux de tronçonnage DC-EX 125/5 C (accessoire)
- 3.7 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.8 Consommables
- 3.9 Indicateur de l'état de charge de l'accu Li-Ion
- 4 Caractéristiques techniques
- 5 Mise en service
- 5.1 Introduction de l'accu
- 5.2 Retrait de l'accu
- 5.3 Montage de la poignée latérale
- 5.4 Montage ou démontage du carter de protection
- 5.5 Montage ou démontage du cache avant
- 5.6 Positionnement du capot dépoussiéreur compact DC-EX 125/5 C
- 5.7 Montage ou démontage des outil amovibles
- 5.7.1 Montage de l'outil amovible
- 5.7.2 Démontage de l'outil amovible
- 5.7.3 Montage de l'outil amovible avec écrou à serrage rapide Kwik lock
- 5.7.4 Démontage de l'outil amovible avec écrou à serrage rapide Kwik lock
- 5.7.5 Montage de l'outil amovible avec filetage intégré
- 5.7.6 Démontage de l'outil amovible
- 6 Utilisation
- 7 Nettoyage, entretien, transport et entreposage
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 2.1 Indicaciones generales de seguridad para herramientas eléctricas
- 2.2 Indicaciones de seguridad generales para las aplicaciones de lijado, lijado con papel de lija, trabajos con cepillos de alambre, pulido y tronzado con muelas:
- 2.3 Indicaciones de seguridad adicionales
- 2.4 Manipulación y utilización segura de las baterías
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Protección de la herramienta en función de la temperatura
- 3.5 Cubierta protectora con tapa delantera
- 3.6 Protector antipolvo para trabajos de tronzado DC-EX 125/5 C cubierta compacta (accesorio)
- 3.7 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.8 Material de consumo
- 3.9 Indicador del estado de carga de la batería de Ion-Litio
- 4 Datos técnicos
- 5 Puesta en servicio
- 6 Manejo
- 7 Cuidado, mantenimiento, transporte y almacenamiento
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Protecção da ferramenta dependente da temperatura
- 3.5 Resguardo do disco com tampa dianteira
- 3.6 Dispositivo de extracção de pó para trabalhos de corte DC-EX 125/5 C (acessório)
- 3.7 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.8 Consumíveis
- 3.9 Indicador do estado de carga da bateria de iões de lítio
- 4 Características técnicas
- 5 Antes de iniciar a utilização
- 6 Utilização
- 7 Conservação, manutenção, transporte e armazenamento
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
*2106619*
2106619 English 9
5 Before use
5.1 Inserting the battery 5
CAUTION
Risk of injury. Due to the angle grinder starting unintentionally.
▶ Before fitting the battery, check that the angle grinder is switched off and that the safety lock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals and the contacts in the angle
grinder are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the tool so that it cannot drop out and fall, thereby presenting
a hazard to other persons.
▶ Fit the battery and check that the battery is securely seated in the power tool.
5.2 Removing the battery 6
▶ Remove the battery.
5.3 Fitting the side handle
▶ Screw the side handle into one of the threaded bushings provided.
5.4 Fitting or removing the guard
CAUTION
Risk of injury. The accessory tool may be hot or have sharp edges.
▶ Wear protective gloves when fitting, removing or adjusting the accessory tool or other parts and when
troubleshooting.
▶ Observe the instructions for fitting the applicable guard.
5.4.1 Fitting the guard 7
The guard is equipped with locating lugs that ensure only guards of a type suitable for use with the
power tool can be fitted. The locating lugs of the guard fit into the guard mount on the power tool.
1. Fit the guard onto the drive spindle collar so that the two triangular marks on the guard and on the power
tool are in alignment.
2. Press the guard onto the drive spindle collar.
3. Press the guard release button.
4. Rotate the guard until it engages and the guard release button jumps back into its original position.
5.4.2 Adjusting the guard
▶ Press the guard release button and then rotate the guard until it engages in the desired position.
5.4.3 Removing the hood
1. Press the guard release button and then rotate the guard until the triangular marks on the guard and the
power tool are in alignment.
2. Remove the guard.
5.5 Fitting or removing the front cover 8
The front cover, when used, is clipped onto the guard.
Printed: 07.03.2018 | Doc-Nr: PUB / 5246614 / 000 / 01