Operating Instruction TE 30-AVR

*2143374*
2143374 English 7
Power tool use and care
▶ Wait until the product has come to a complete stop before you lay it
down.
3 Description
3.1 Overview of the product 1
@
Chuck
;
Depth gauge release button
=
Depth gauge
%
Function selector switch
&
Active Vibration Reduction
(AVR)
(
Control switch
)
Grip
+
Supply cord
§
Forward / reverse switch
/
Side handle
3.2 Intended use
The product described is an electrically powered combihammer. It is
designed for drilling in concrete, masonry, wood and metal.
The version with AVR can also be used for light to medium-duty chiseling
on masonry and for finishing work on concrete.
▶ The tool may be operated only when connected to a power source
providing a voltage and frequency in compliance with the information
given on the type identification plate.
3.3 Possible misuse
• This product is not suitable for working on hazardous materials.
• This product is not suitable for working in a damp environment.
3.4 AVR option
The product may be optionally equipped with an Active Vibration Reduction
(AVR) system, which reduces vibration noticeably.
3.5 Motor protection system
The tool is equipped with a motor protection system. The system monitors
current input and motor temperature and thus prevents the tool from
overheating.
If the motor is overloaded through application of excessive working pressure,
the power tool’s performance drops noticeably or it may stall completely.
If the power tool stalls or slows significantly due to overloading, release the
pressure applied to the tool and then allow it to run under no load for approx.
30 seconds.
3.6 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.