COLA RR 26176 Seismic Components Approval Document

Hilti, Inc.
Re: MQS-SP, MQS-SP-L, MQS-SP-T, MQS-IB Bracing, and Seismic Brace System
RR 26176
Page 5 of 9
DISCUSSION
The technical modification is to capture approval of the Hilti Seismic Brace System and to capture
compliance with the 2020 Los Angeles Building Code.
This report is in compliance with the 2020 City of Los Angeles Building Code.
The approval is based on tests and analysis on file with the Engineering Research Section.
Addressee to whom this Research Report is issued is responsible for providing copies of it,
complete with any attachments indicated, to architects, engineers and builders using items
approved herein in design or construction which must be approved by Department of Building and
Safety Engineers and Inspectors.
This general approval of an equivalent alternate to the Code is only valid where an engineer and/or
inspector of this Department has determined that all conditions of this approval have been met in
the project in which it is to be used.
________________________
David Chang, Chief
Engineering Research Section
201 N. Figueroa St., Room 880
Los Angeles, CA 90012
Phone: [phone]
Fax: [phone]
DC
LARR 26176
TLB2000148
R08/02/2020
104.2.6